Hydraulics and PneumaticsLaajuus (5 cr)
Code: 5031290
Credits
5 op
Objective
After completing the course, the student has basic skills in the design, use and troubleshooting the hydraulic and pneumatic systems.
Content
After completing the course the student can choose the components and perform basic design of hydraulic and pneumatic systems. The course consists of theory lessons, examples of systems used in real life and laboratory simulations made with real components and also by using simulation softwares.
Enrollment
07.10.2024 - 10.01.2025
Timing
06.01.2025 - 31.05.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Teachers
- Jyri Tulonen
Teacher in charge
Jyri Tulonen
Scheduling groups
- A1 (Size: 25. Open UAS: 0.)
- A2 (Size: 25. Open UAS: 0.)
- B1 (Size: 25. Open UAS: 0.)
- B2 (Size: 25. Open UAS: 0.)
Groups
-
PKONTS23APKONTS23A
-
PKONTS23BPKONTS23B
-
PKONTS23
Small groups
- A1
- A2
- B1
- B2
Objective
After completing the course, the student has basic skills in the design, use and troubleshooting the hydraulic and pneumatic systems.
Content
After completing the course the student can choose the components and perform basic design of hydraulic and pneumatic systems. The course consists of theory lessons, examples of systems used in real life and laboratory simulations made with real components and also by using simulation softwares.
Evaluation scale
H-5
Enrollment
01.06.2024 - 02.09.2024
Timing
02.09.2024 - 18.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Seats
0 - 100
Teachers
- Jyri Tulonen
Teacher in charge
Jyri Tulonen
Scheduling groups
- A1 (Size: 25. Open UAS: 0.)
- A2 (Size: 25. Open UAS: 0.)
- B1 (Size: 25. Open UAS: 0.)
- B2 (Size: 25. Open UAS: 0.)
Groups
-
PKONTK23BPKONTK23B
-
PKONTK23
-
PKONTK23APKONTK23A
Small groups
- A1
- A2
- B1
- B2
Objective
After completing the course, the student has basic skills in the design, use and troubleshooting the hydraulic and pneumatic systems.
Content
After completing the course the student can choose the components and perform basic design of hydraulic and pneumatic systems. The course consists of theory lessons, examples of systems used in real life and laboratory simulations made with real components and also by using simulation softwares.
Evaluation scale
H-5
Enrollment
01.12.2023 - 08.01.2024
Timing
08.01.2024 - 31.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Jyri Tulonen
Teacher in charge
Jyri Tulonen
Scheduling groups
- A1 (Size: 30. Open UAS: 0.)
- A2 (Size: 30. Open UAS: 0.)
- B1 (Size: 30. Open UAS: 0.)
- B2 (Size: 30. Open UAS: 0.)
Groups
-
PKONTS22BPKONTS22B
-
PKONTS22APKONTS22A
-
PKONTS22
Small groups
- A1
- A2
- B1
- B2
Objective
After completing the course, the student has basic skills in the design, use and troubleshooting the hydraulic and pneumatic systems.
Content
After completing the course the student can choose the components and perform basic design of hydraulic and pneumatic systems. The course consists of theory lessons, examples of systems used in real life and laboratory simulations made with real components and also by using simulation softwares.
Evaluation scale
H-5
Enrollment
01.06.2023 - 03.09.2023
Timing
01.09.2023 - 31.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Seats
0 - 110
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Jyri Tulonen
Teacher in charge
Jyri Tulonen
Scheduling groups
- A1 (Size: 25. Open UAS: 0.)
- A2 (Size: 25. Open UAS: 0.)
- B1 (Size: 25. Open UAS: 0.)
- B2 (Size: 25. Open UAS: 0.)
Groups
-
PKONTK22APKONTK22A
-
PKONTK22BPKONTK22B
-
PKONTK22
Small groups
- A1
- A2
- B1
- B2
Objective
After completing the course, the student has basic skills in the design, use and troubleshooting the hydraulic and pneumatic systems.
Content
After completing the course the student can choose the components and perform basic design of hydraulic and pneumatic systems. The course consists of theory lessons, examples of systems used in real life and laboratory simulations made with real components and also by using simulation softwares.
Evaluation scale
H-5
Enrollment
02.12.2022 - 08.01.2023
Timing
01.01.2023 - 31.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Jyri Tulonen
Teacher in charge
Jyri Tulonen
Scheduling groups
- A1 (Size: 25. Open UAS: 0.)
- A2 (Size: 25. Open UAS: 0.)
- B1 (Size: 25. Open UAS: 0.)
- B2 (Size: 25. Open UAS: 0.)
Groups
-
PKONTS21BPKONTS21B
-
PKONTS21APKONTS21A
-
PKONTS21
Small groups
- A1
- A2
- B1
- B2
Objective
After completing the course, the student has basic skills in the design, use and troubleshooting the hydraulic and pneumatic systems.
Content
After completing the course the student can choose the components and perform basic design of hydraulic and pneumatic systems. The course consists of theory lessons, examples of systems used in real life and laboratory simulations made with real components and also by using simulation softwares.
Evaluation scale
H-5
Enrollment
02.08.2022 - 15.10.2022
Timing
01.09.2022 - 31.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Jyri Tulonen
- Petri Rautio
Teacher in charge
Petri Rautio
Scheduling groups
- A (Size: 35. Open UAS: 0.)
- B (Size: 35. Open UAS: 0.)
Groups
-
PKONTK21B
-
PKONTK21
-
PKONTK21A
Small groups
- PKONTK21A
- PKONTK21B
Objective
After completing the course, the student has basic skills in the design, use and troubleshooting the hydraulic and pneumatic systems.
Content
After completing the course the student can choose the components and perform basic design of hydraulic and pneumatic systems. The course consists of theory lessons, examples of systems used in real life and laboratory simulations made with real components and also by using simulation softwares.
Evaluation scale
H-5
Enrollment
11.12.2021 - 31.01.2022
Timing
11.01.2022 - 31.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Petri Rautio
Teacher in charge
Petri Rautio
Scheduling groups
- PKONTS20A (Size: 45. Open UAS: 0.)
- PKONTS20B (Size: 45. Open UAS: 0.)
Groups
-
PKONTS20
-
PKONTS20BPKONTS20B
-
PKONTS20APKONTS20A
Small groups
- PKONTS20A
- PKONTS20B
Objective
After completing the course, the student has basic skills in the design, use and troubleshooting the hydraulic and pneumatic systems.
Content
After completing the course the student can choose the components and perform basic design of hydraulic and pneumatic systems. The course consists of theory lessons, examples of systems used in real life and laboratory simulations made with real components and also by using simulation softwares.
Evaluation scale
H-5