Technical Drawing and 3D ModellingLaajuus (5 cr)
Code: TE00CU31
Credits
5 op
Objective
After completing the course the student:
- can create an unambiguous and clear image of a 2D model using the definitions of projection and sectional drawings in technical drawing standards
- understands the principles of feature modelling.
- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.
Content
- 2D sketch
- product projection methods
- technical drawings (views, sections and cuts)
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
Enrollment
01.12.2024 - 15.01.2025
Timing
13.01.2025 - 30.04.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Technology Industry
Campus
Kupittaa Campus
Teaching languages
- Finnish
- English
Seats
4 - 25
Degree programmes
- Degree Programme in Mechanical Engineering
- Degree Programme in Mechanical Engineering
Teachers
- Mika Seppänen
Groups
-
PMECES24Bachelor of Engineering, Mechanical Engineering
Objective
After completing the course the student:
- can create an unambiguous and clear image of a 2D model using the definitions of projection and sectional drawings in technical drawing standards
- understands the principles of feature modelling.
- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.
Content
- 2D sketch
- product projection methods
- technical drawings (views, sections and cuts)
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
Materials
The programs' guidebooks, exercises and electronic "Help" material.
Teaching methods
Task-specific instructions given by the teacher, exercises done in class and independent work.
Exam schedules
Modelling exam on the last week of the course.
Re-exam on the week 19/2025.
International connections
Learning by doing, independent work and, understanding of the impact of technical solutions on the environment and the economy
Student workload
The course consists of contact teaching, class work and independent work.
Contact teaching basically 12h/credit, independent work 15h/credit. The time and place indicated in the agenda.
Late returns affects the course grade
Content scheduling
Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, and visualization.
Further information
ItsLearning- Course-specific workspace.
Evaluation scale
H-5
Assessment methods and criteria
Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes
Assessment criteria, fail (0)
Agreed tasks have not been returned to the Itslearning course-specific return box.
Assessment criteria, satisfactory (1-2)
Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.
Assessment criteria, good (3-4)
All tasks (grade (3-4)) completed well and carefully.
Assessment criteria, excellent (5)
All tasks (grade 5) completed well and carefully.
Enrollment
07.10.2024 - 05.01.2025
Timing
06.01.2025 - 30.05.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Technology Industry
Campus
Kupittaa Campus
Teaching languages
- Finnish
- English
Degree programmes
- Degree Programme in Mechanical Engineering
- Degree Programme in Mechanical Engineering
Teachers
- Mika Seppänen
- Kimmo Metsämäki
Teacher in charge
Mika Seppänen
Scheduling groups
- PKONTK25_A1 1 (Size: 0. Open UAS: 0.)
- PKONTK25_A2 2 (Size: 0. Open UAS: 0.)
- PKONTK25_B1 3 (Size: 0. Open UAS: 0.)
- PKONTK25_B2 4 (Size: 0. Open UAS: 0.)
Groups
-
PKONTK25BPKONTK25B
-
PKONTK25APKONTK25A
-
PKONTK25
Small groups
- PKONTK25_A1 1
- PKONTK25_A2 2
- PKONTK25_B1 3
- PKONTK25_B2 4
Objective
After completing the course the student:
- can create an unambiguous and clear image of a 2D model using the definitions of projection and sectional drawings in technical drawing standards
- understands the principles of feature modelling.
- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.
Content
- 2D sketch
- product projection methods
- technical drawings (views, sections and cuts)
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
Materials
The programs' guidebooks, exercises and electronic "Help" material.
Teaching methods
Task-specific instructions given by the teacher, exercises done in class and independent work.
Exam schedules
Modelling exam on the last week of the course.
Re-exam on the week 19/2025.
International connections
Learning by doing, independent work and, understanding of the impact of technical solutions on the environment and the economy
Student workload
The course consists of contact teaching, class work and independent work.
Contact teaching basically 12h/credit, independent work 15h/credit. The time and place indicated in the agenda.
Late returns affects the course grade
Content scheduling
Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, and visualization.
Further information
ItsLearning- Course-specific workspace.
Evaluation scale
H-5
Assessment methods and criteria
Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes
Assessment criteria, fail (0)
Agreed tasks have not been returned to the Itslearning course-specific return box.
Assessment criteria, satisfactory (1-2)
Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.
Assessment criteria, good (3-4)
All tasks (grade (3-4)) completed well and carefully.
Assessment criteria, excellent (5)
All tasks (grade 5) completed well and carefully.
Enrollment
01.06.2024 - 02.09.2024
Timing
02.09.2024 - 18.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
- English
Seats
0 - 100
Degree programmes
- Degree Programme in Mechanical Engineering
- Degree Programme in Mechanical Engineering
Teachers
- Merja Peltokoski
- Pekka Törnqvist
Teacher in charge
Merja Peltokoski
Scheduling groups
- PKONTS24A1 (Size: 25. Open UAS: 0.)
- PKONTS24A2 (Size: 25. Open UAS: 0.)
- PKONTS24B1 (Size: 25. Open UAS: 0.)
- PKONTS24B2 (Size: 25. Open UAS: 0.)
Groups
-
PKONTS24
-
PKONTS24APKONTS24A
-
PKONTS24BPKONTS24B
Small groups
- PKONTS24A1
- PKONTS24A2
- PKONTS24B1
- PKONTS24B2
Objective
After completing the course the student:
- can create an unambiguous and clear image of a 2D model using the definitions of projection and sectional drawings in technical drawing standards
- understands the principles of feature modelling.
- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.
Content
- 2D sketch
- product projection methods
- technical drawings (views, sections and cuts)
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
Evaluation scale
H-5
Enrollment
31.07.2024 - 27.09.2024
Timing
30.08.2024 - 13.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
- Degree Programme in Mechanical Engineering
Teachers
- Mika Seppänen
- Kimmo Metsämäki
Teacher in charge
Mika Seppänen
Groups
-
MKONTS24
Objective
After completing the course the student:
- can create an unambiguous and clear image of a 2D model using the definitions of projection and sectional drawings in technical drawing standards
- understands the principles of feature modelling.
- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.
Content
- 2D sketch
- product projection methods
- technical drawings (views, sections and cuts)
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
Materials
The programs' guidebooks, exercises and electronic "Help" material.
Teaching methods
Task-specific instructions given by the teacher, exercises done in class and independent work.
Exam schedules
Modelling exam on the last week of the course.
Re-exam on the week 1/2025.
International connections
Learning by doing, independent work and, understanding of the impact of technical solutions on the environment and the economy
Student workload
The course consists of contact teaching, class work and independent work.
Contact teaching basically 12h/credit, independent work 15h/credit. The time and place indicated in the agenda.
Late returns affects the course grade
Content scheduling
Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, and visualization.
Further information
ItsLearning- Course-specific workspace.
Evaluation scale
H-5
Assessment methods and criteria
Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes
Assessment criteria, fail (0)
Agreed tasks have not been returned to the Itslearning course-specific return box.
Assessment criteria, satisfactory (1-2)
Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.
Assessment criteria, good (3-4)
All tasks (grade (3-4)) completed well and carefully.
Assessment criteria, excellent (5)
All tasks (grade 5) completed well and carefully.