Strength of materials structuresLaajuus (5 cr)
Code: 5031288
Credits
5 op
Objective
After completing the course the student:
- understands the influence of inertia forces and moments to the structures
- analyze the strength of a relatively complex structures
- be able to design structures based on ultimate limit state
- be able to design shafts and buckling structures
- knows the methods to design structures under alternate stress
Content
- kinematics
- kinetics
- deflection curve formula
- torsion shaft design
- buckling
- fatique
Enrollment
03.08.2024 - 06.09.2024
Timing
02.09.2024 - 18.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tommi Metso
Teacher in charge
Tommi Metso
Groups
-
PKONTS23APKONTS23A
-
PKONTS23BPKONTS23B
-
PKONTS23
Objective
After completing the course the student:
- understands the influence of inertia forces and moments to the structures
- analyze the strength of a relatively complex structures
- be able to design structures based on ultimate limit state
- be able to design shafts and buckling structures
- knows the methods to design structures under alternate stress
Content
- kinematics
- kinetics
- deflection curve formula
- torsion shaft design
- buckling
- fatique
Materials
Whole course material is available in Optima portal.
Teaching methods
The course is implemented via Flipped Learning method. All the lectures are available via links in optima Lujuusopin perusteet workspace. It is students duty to get to know the material beforehand.
Exam schedules
The exact date of the exam can be found in the implementation plan of the learning portal.
International connections
Flipped learning
Completion alternatives
solving exercises independently remotely and return them admitted before the deadline.
Student workload
During the course about 15 strength of materials and 25 dynamics exercises is solved in contact hours.
Content scheduling
-Basic of kinematics and kinetics
-In this second course related to strength of materials, the student concentrates on methods to evaluate the deflections in bended beam structures. Furthermore, the shearing stresses and angular deformations and shafts under torsion are considered. Also, principles of buckling and fatigue analysis will be discussed.
Exact TIme table is available in ITslearning portals work space
Further information
https://turkuamk.itslearning.com/
Evaluation scale
H-5
Assessment methods and criteria
Passing the course (grade 1) is possible by completing remote assignments. See the learning portal for more detailed instructions. Achieving better grades requires taking the exam.
Assessment criteria, fail (0)
The total points of the exercises are not enough to pass. 40% of the points have not been achieved in the exam.
Assessment criteria, satisfactory (1-2)
The total points of the exam and assignments exceed 40%.
Assessment criteria, good (3-4)
The total points of the exam and assignments exceed 80%.
Assessment criteria, excellent (5)
The total points of the exam and assignments exceed 87%.
Enrollment
01.12.2023 - 08.01.2024
Timing
08.01.2024 - 31.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tommi Metso
Teacher in charge
Tommi Metso
Groups
-
PKONTK23BPKONTK23B
-
PKONTK23
-
PKONTK23APKONTK23A
Objective
After completing the course the student:
- understands the influence of inertia forces and moments to the structures
- analyze the strength of a relatively complex structures
- be able to design structures based on ultimate limit state
- be able to design shafts and buckling structures
- knows the methods to design structures under alternate stress
Content
- kinematics
- kinetics
- deflection curve formula
- torsion shaft design
- buckling
- fatique
Materials
Whole course material is available in Optima portal.
Teaching methods
The course is implemented via Flipped Learning method. All the lectures are available via links in optima Lujuusopin perusteet workspace. It is students duty to get to know the material beforehand.
International connections
Flipped learning
Completion alternatives
solving exercises independently remotely and return them admitted before the deadline.
Student workload
During the course about 15 strength of materials and 25 dynamics exercises is solved in contact hours.
Content scheduling
-Basic of kinematics and kinetics
-In this second course related to strength of materials, the student concentrates on methods to evaluate the deflections in bended beam structures. Furthermore, the shearing stresses and angular deformations and shafts under torsion are considered. Also, principles of buckling and fatigue analysis will be discussed.
Exact TIme table is available in ITslearning portals work space
Evaluation scale
H-5
Assessment methods and criteria
Passing the course (grade 1) is possible by completing remote assignments. See the learning portal for more detailed instructions. Achieving better grades requires taking the exam.
Assessment criteria, fail (0)
The total points of the exercises are not enough to pass. 40% of the points have not been achieved in the exam.
Assessment criteria, satisfactory (1-2)
The total points of the exam and assignments exceed 40%.
Assessment criteria, good (3-4)
The total points of the exam and assignments exceed 80%.
Assessment criteria, excellent (5)
The total points of the exam and assignments exceed 87%.
Enrollment
01.06.2023 - 04.09.2023
Timing
01.09.2023 - 17.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tommi Metso
Teacher in charge
Tommi Metso
Groups
-
PKONTS22BPKONTS22B
-
PKONTS22APKONTS22A
-
PKONTS22
Objective
After completing the course the student:
- understands the influence of inertia forces and moments to the structures
- analyze the strength of a relatively complex structures
- be able to design structures based on ultimate limit state
- be able to design shafts and buckling structures
- knows the methods to design structures under alternate stress
Content
- kinematics
- kinetics
- deflection curve formula
- torsion shaft design
- buckling
- fatique
Materials
Whole course material is available in Optima portal.
Teaching methods
The course is implemented via Flipped Learning method. All the lectures are available via links in optima Lujuusopin perusteet workspace. It is students duty to get to know the material beforehand.
International connections
Flipped learning
Completion alternatives
solving exercises independently remotely and return them admitted before the deadline.
Student workload
During the course about 15 strength of materials and 25 dynamics exercises is solved in contact hours.
Content scheduling
-Basic of kinematics and kinetics
-In this second course related to strength of materials, the student concentrates on methods to evaluate the deflections in bended beam structures. Furthermore, the shearing stresses and angular deformations and shafts under torsion are considered. Also, principles of buckling and fatigue analysis will be discussed.
Exact TIme table is available in ITslearning portals work space
Evaluation scale
H-5
Assessment methods and criteria
Passing the course (grade 1) is possible by completing remote assignments. See the learning portal for more detailed instructions. Achieving better grades requires taking the exam.
Assessment criteria, fail (0)
The total points of the exercises are not enough to pass. 40% of the points have not been achieved in the exam.
Assessment criteria, satisfactory (1-2)
The total points of the exam and assignments exceed 40%.
Assessment criteria, good (3-4)
The total points of the exam and assignments exceed 80%.
Assessment criteria, excellent (5)
The total points of the exam and assignments exceed 87%.
Enrollment
02.12.2022 - 15.01.2023
Timing
01.01.2023 - 28.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tommi Metso
Teacher in charge
Tommi Metso
Groups
-
PKONTK22APKONTK22A
-
PKONTK22BPKONTK22B
-
PKONTK22
Objective
After completing the course the student:
- understands the influence of inertia forces and moments to the structures
- analyze the strength of a relatively complex structures
- be able to design structures based on ultimate limit state
- be able to design shafts and buckling structures
- knows the methods to design structures under alternate stress
Content
- kinematics
- kinetics
- deflection curve formula
- torsion shaft design
- buckling
- fatique
Materials
Whole course material is available in Optima portal.
Teaching methods
The course is implemented via Flipped Learning method. All the lectures are available via links in optima Lujuusopin perusteet workspace. It is students duty to get to know the material beforehand.
International connections
Flipped learning
Completion alternatives
solving exercises independently remotely and return them admitted before the deadline.
Student workload
During the course about 15 strength of materials and 25 dynamics exercises is solved in contact hours.
Content scheduling
-Basic of kinematics and kinetics
-In this second course related to strength of materials, the student concentrates on methods to evaluate the deflections in bended beam structures. Furthermore, the shearing stresses and angular deformations and shafts under torsion are considered. Also, principles of buckling and fatigue analysis will be discussed.
Exact TIme table is available in ITslearning portals work space
Evaluation scale
H-5
Assessment methods and criteria
Passing the course (grade 1) is possible by completing remote assignments. See the learning portal for more detailed instructions. Achieving better grades requires taking the exam.
Assessment criteria, fail (0)
The total points of the exercises are not enough to pass. 40% of the points have not been achieved in the exam.
Assessment criteria, satisfactory (1-2)
The total points of the exam and assignments exceed 40%.
Assessment criteria, good (3-4)
The total points of the exam and assignments exceed 80%.
Assessment criteria, excellent (5)
The total points of the exam and assignments exceed 87%.
Enrollment
02.08.2022 - 15.09.2022
Timing
01.09.2022 - 31.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tommi Metso
Teacher in charge
Tommi Metso
Groups
-
PKONTS21BPKONTS21B
-
PKONTS21APKONTS21A
-
PKONTS21
Objective
After completing the course the student:
- understands the influence of inertia forces and moments to the structures
- analyze the strength of a relatively complex structures
- be able to design structures based on ultimate limit state
- be able to design shafts and buckling structures
- knows the methods to design structures under alternate stress
Content
- kinematics
- kinetics
- deflection curve formula
- torsion shaft design
- buckling
- fatique
Materials
Whole course material is available in Optima portal.
Teaching methods
The course is implemented via Flipped Learning method. All the lectures are available via links in optima Lujuusopin perusteet workspace. It is students duty to get to know the material beforehand.
International connections
Flipped learning
Completion alternatives
solving exercises independently remotely and return them admitted before the deadline.
Student workload
During the course about 15 strength of materials and 25 dynamics exercises is solved in contact hours.
Content scheduling
-Basic of kinematics and kinetics
-In this second course related to strength of materials, the student concentrates on methods to evaluate the deflections in bended beam structures. Furthermore, the shearing stresses and angular deformations and shafts under torsion are considered. Also, principles of buckling and fatigue analysis will be discussed.
Exact TIme table is available in ITslearning portals work space
Evaluation scale
H-5
Assessment methods and criteria
Passing the course (grade 1) is possible by completing remote assignments. See the learning portal for more detailed instructions. Achieving better grades requires taking the exam.
Assessment criteria, fail (0)
The total points of the exercises are not enough to pass. 40% of the points have not been achieved in the exam.
Assessment criteria, satisfactory (1-2)
The total points of the exam and assignments exceed 40%.
Assessment criteria, good (3-4)
The total points of the exam and assignments exceed 80%.
Assessment criteria, excellent (5)
The total points of the exam and assignments exceed 87%.
Enrollment
11.12.2021 - 09.01.2022
Timing
09.01.2022 - 29.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tommi Metso
Teacher in charge
Tommi Metso
Groups
-
PKONTK21B
-
PKONTK21
-
PKONTK21A
Objective
After completing the course the student:
- understands the influence of inertia forces and moments to the structures
- analyze the strength of a relatively complex structures
- be able to design structures based on ultimate limit state
- be able to design shafts and buckling structures
- knows the methods to design structures under alternate stress
Content
- kinematics
- kinetics
- deflection curve formula
- torsion shaft design
- buckling
- fatique
Materials
Whole course material is available in Optima portal.
Teaching methods
The course is implemented via Flipped Learning method. All the lectures are available via links in optima Lujuusopin perusteet workspace. It is students duty to get to know the material beforehand.
International connections
Flipped learning
Completion alternatives
solving exercises independently remotely and return them admitted before the deadline.
Student workload
During the course about 15 strength of materials and 25 dynamics exercises is solved in contact hours.
Content scheduling
-Basic of kinematics and kinetics
-In this second course related to strength of materials, the student concentrates on methods to evaluate the deflections in bended beam structures. Furthermore, the shearing stresses and angular deformations and shafts under torsion are considered. Also, principles of buckling and fatigue analysis will be discussed.
Exact TIme table is available in ITslearning portals work space
Evaluation scale
H-5
Assessment methods and criteria
Passing the course (grade 1) is possible by completing remote assignments. See the learning portal for more detailed instructions. Achieving better grades requires taking the exam.
Assessment criteria, fail (0)
The total points of the exercises are not enough to pass. 40% of the points have not been achieved in the exam.
Assessment criteria, satisfactory (1-2)
The total points of the exam and assignments exceed 40%.
Assessment criteria, good (3-4)
The total points of the exam and assignments exceed 80%.
Assessment criteria, excellent (5)
The total points of the exam and assignments exceed 87%.