Siirry suoraan sisältöön

Introduction to NetworksLaajuus (5 op)

Tunnus: TE00BU11

Laajuus

5 op

Osaamistavoitteet

By the end of the course, students will be able to:

• Configure switches and end devices to provide access to local and remote network resources.

• Explain how physical and data link layer protocols support the operation of Ethernet in a switched network.

• Configure routers to enable end-to-end connectivity between remote devices.

• Create IPv4 and IPv6 addressing schemes and verify network connectivity between devices.

• Explain how the upper layers of the OSI model support network applications.

• Use security best practices to configure a small network.

• Troubleshoot connectivity in a small network.

Sisältö

CCNAv7 Introduction to Networks (ITN) course introduces students to networking architectures, models, protocols, and components. These components facilitate the connection of users, devices, applications and data through the internet and across modern computer networks. By the end of the course, students can perform basic configurations for routers and switches to build simple local area networks (LANs) that integrate IP addressing schemes and foundational network security.

Esitietovaatimukset

Internet Networks and Security (5051215) tai vastaavat tiedot ja taidot.

Ilmoittautumisaika

01.06.2024 - 09.09.2024

Ajoitus

02.09.2024 - 13.12.2024

Opintopistemäärä

5 op

Toteutustapa

Lähiopetus

Yksikkö

Tekniikka ja liiketoiminta

Toimipiste

Kupittaan kampus

Opetuskielet
  • Englanti
Paikat

20 - 60

Koulutus
  • Tieto- ja viestintätekniikan koulutus
  • Degree Programme in Information and Communications Technology
Opettaja
  • Tero Virtanen
  • Marko Teräspuro
Ryhmät
  • PTIVIS23T
    Data Networks and Cybersecurity
  • PTIETS23dncs
    Data Networks and Cybersecurity

Tavoitteet

By the end of the course, students will be able to:

• Configure switches and end devices to provide access to local and remote network resources.

• Explain how physical and data link layer protocols support the operation of Ethernet in a switched network.

• Configure routers to enable end-to-end connectivity between remote devices.

• Create IPv4 and IPv6 addressing schemes and verify network connectivity between devices.

• Explain how the upper layers of the OSI model support network applications.

• Use security best practices to configure a small network.

• Troubleshoot connectivity in a small network.

Sisältö

CCNAv7 Introduction to Networks (ITN) course introduces students to networking architectures, models, protocols, and components. These components facilitate the connection of users, devices, applications and data through the internet and across modern computer networks. By the end of the course, students can perform basic configurations for routers and switches to build simple local area networks (LANs) that integrate IP addressing schemes and foundational network security.

Oppimateriaalit

All needed material will be available online in https://cisco.netacad.com
Further course enrollment instructions are provided by instructor.
Please register to the site using school email.

Tenttien ajankohdat ja uusintamahdollisuudet

Theory final exam and Packet Tracer exam will held in course.
You can do one re-exam within course deadline.
NOTE: Course ending time shown in academy system is not real, please check the course plan for end date!

Opiskelijan ajankäyttö ja kuormitus

Lecturing and laboratory work each week
Independent studying, including:

- Studying the course material
- Completing exercises
- Preparation for finals exam(s)

Sisällön jaksotus

Course covers the architecture, structure, functions and components of the Internet and other computer networks. Students achieve a basic understanding of how networks operate and how to build simple local area networks (LAN), perform basic configurations for routers and switches, and implement Internet Protocol (IP).
By the end of the course, students will be able to:

- Configure switches and end devices to provide access to local and remote netwok resources.
- Explain how physical and data link layer protocols support the operation of Ethernet in a switched network.
- Configure routers to enable end-to-end connectivity between remote devices.
- Create IPv4 and IPv6 addressing schemes and verify network connectivity between devices.
- Explain how the upper layers of the OSI model support network applications.
- Configure a small network with security best practices.
- Troubleshoot connectivity in a small network.

Arviointiasteikko

H-5

Arviointimenetelmät ja arvioinnin perusteet

Laboratory assignments in laboratory room
Packet tracer assignments done at home
Module exams
Practice final exams
Theory final exam and Packet Tracer final exam.

The overall result is the sum of the all results of the assignments and exams, passing limit is 50%.
Detailed grading limits will be provided in course plan when course starts but past grading limits have been the following:

Less than 50% Fail
50-59% Grade 1
60-69% Grade 2
70-79% Grade 3
80-89% Grade 4
90% or higher Grade 5

Esitietovaatimukset

Internet Networks and Security (5051215) tai vastaavat tiedot ja taidot.

Ilmoittautumisaika

01.06.2023 - 04.09.2023

Ajoitus

01.09.2023 - 15.12.2023

Opintopistemäärä

5 op

Toteutustapa

Lähiopetus

Yksikkö

Tekniikka ja liiketoiminta

Toimipiste

Kupittaan kampus

Opetuskielet
  • Englanti
Paikat

0 - 60

Koulutus
  • Tieto- ja viestintätekniikan koulutus
  • Degree Programme in Information and Communications Technology
Opettaja
  • Tero Virtanen
  • Marko Teräspuro
Vastuuopettaja

Tero Virtanen

Ryhmät
  • PTIETS22dncs
    PTIETS22 Tietoverkot ja Kyberturva
  • PTIVIS22T
    Data Networks and Cybersecurity

Tavoitteet

By the end of the course, students will be able to:

• Configure switches and end devices to provide access to local and remote network resources.

• Explain how physical and data link layer protocols support the operation of Ethernet in a switched network.

• Configure routers to enable end-to-end connectivity between remote devices.

• Create IPv4 and IPv6 addressing schemes and verify network connectivity between devices.

• Explain how the upper layers of the OSI model support network applications.

• Use security best practices to configure a small network.

• Troubleshoot connectivity in a small network.

Sisältö

CCNAv7 Introduction to Networks (ITN) course introduces students to networking architectures, models, protocols, and components. These components facilitate the connection of users, devices, applications and data through the internet and across modern computer networks. By the end of the course, students can perform basic configurations for routers and switches to build simple local area networks (LANs) that integrate IP addressing schemes and foundational network security.

Oppimateriaalit

All needed material will be available online in https://cisco.netacad.com
Further course enrollment instructions are provided by instructor.
Please register to the site using school email.

Tenttien ajankohdat ja uusintamahdollisuudet

Theory final exam and Packet Tracer exam will held in course.
You can do one re-exam within course deadline.
NOTE: Course ending time shown in academy system is not real, please check the course plan for end date!

Opiskelijan ajankäyttö ja kuormitus

Lecturing and laboratory work each week
Independent studying, including:

- Studying the course material
- Completing exercises
- Preparation for finals exam(s)

Sisällön jaksotus

Course covers the architecture, structure, functions and components of the Internet and other computer networks. Students achieve a basic understanding of how networks operate and how to build simple local area networks (LAN), perform basic configurations for routers and switches, and implement Internet Protocol (IP).
By the end of the course, students will be able to:

- Configure switches and end devices to provide access to local and remote netwok resources.
- Explain how physical and data link layer protocols support the operation of Ethernet in a switched network.
- Configure routers to enable end-to-end connectivity between remote devices.
- Create IPv4 and IPv6 addressing schemes and verify network connectivity between devices.
- Explain how the upper layers of the OSI model support network applications.
- Configure a small network with security best practices.
- Troubleshoot connectivity in a small network.

Arviointiasteikko

H-5

Arviointimenetelmät ja arvioinnin perusteet

Laboratory assignments in laboratory room
Packet tracer assignments done at home
Module exams
Practice final exams
Theory final exam and Packet Tracer final exam.

The overall result is the sum of the all results of the assignments and exams, passing limit is 60%.
Detailed grading limits will be provided in course plan when course starts but past grading limits have been the following:

Less than 60% Fail
60-67.4% Grade 1
68-75.4% Grade 2
76-83.4% Grade 3
84-91.4% Grade 4
91.5% or higher Grade 5

Esitietovaatimukset

Internet Networks and Security (5051215) tai vastaavat tiedot ja taidot.

Ilmoittautumisaika

01.06.2022 - 07.09.2022

Ajoitus

05.09.2022 - 15.12.2022

Opintopistemäärä

5 op

Toteutustapa

Lähiopetus

Yksikkö

Tekniikka ja liiketoiminta

Toimipiste

Kupittaan kampus

Opetuskielet
  • Englanti
Paikat

0 - 60

Koulutus
  • Tieto- ja viestintätekniikan koulutus
  • Degree Programme in Information and Communications Technology
Opettaja
  • Tero Virtanen
Vastuuopettaja

Tero Virtanen

Ajoitusryhmät
  • R1 (Koko: 30. Avoin AMK: 0.)
  • R2 (Koko: 30. Avoin AMK: 0.)
Ryhmät
  • PTIVIS21T
    Data Networks and Cybersecurity
Pienryhmät
  • R1
  • R2

Tavoitteet

By the end of the course, students will be able to:

• Configure switches and end devices to provide access to local and remote network resources.

• Explain how physical and data link layer protocols support the operation of Ethernet in a switched network.

• Configure routers to enable end-to-end connectivity between remote devices.

• Create IPv4 and IPv6 addressing schemes and verify network connectivity between devices.

• Explain how the upper layers of the OSI model support network applications.

• Use security best practices to configure a small network.

• Troubleshoot connectivity in a small network.

Sisältö

CCNAv7 Introduction to Networks (ITN) course introduces students to networking architectures, models, protocols, and components. These components facilitate the connection of users, devices, applications and data through the internet and across modern computer networks. By the end of the course, students can perform basic configurations for routers and switches to build simple local area networks (LANs) that integrate IP addressing schemes and foundational network security.

Arviointiasteikko

H-5

Esitietovaatimukset

Internet Networks and Security (5051215) tai vastaavat tiedot ja taidot.