Planning and CostsLaajuus (3 cr)
Code: 5031377
Credits
3 op
Objective
After completing the course the student:
• Understand the impact of product design on product life cycle costs
• Understand LEAN principles from a design perspective
Content
- DFM
- DFA
- LEAN tuotekehitys
Enrollment
01.06.2024 - 01.09.2024
Timing
02.09.2024 - 20.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tommi Metso
Teacher in charge
Tommi Metso
Groups
-
PKONTS23
Objective
After completing the course the student:
• Understand the impact of product design on product life cycle costs
• Understand LEAN principles from a design perspective
Content
- DFM
- DFA
- LEAN tuotekehitys
Materials
E-book
Developing new products and services : learning, differentiation, and innovation
Sanders, G. Lawrence ; Huefner, Ronald J.
Business Expert Press cop. 2012. 1st ed
Design for manufacturing : a structured approach
Teaching methods
Teacher-centered learning methods
-tutorial on materials
Student-centered learning method
-independent data search
Functional learning methods
-cost management exercises
-simulations
International connections
project Based Learning
Completion alternatives
Reporting an independently completed project
Student workload
contact lesson 16 h
self study 32 h
collaborative study 39 h
Content scheduling
Course Objectives
After completing the course, the student:
understand the impact of product design on product lifecycle costs
understands LEAN principles from a design perspective
Course contents
DFM
DFA
LEAN product development
modularity
Further information
https://turkuamk.itslearning.com/
Evaluation scale
H-5
Assessment methods and criteria
The five themes and related feedback are rated on a scale of 0-5, both as a peer review and by the lecturer.
The evaluation criteria can be found in the ITsLearning environment for each task separately.
Enrollment
09.12.2023 - 07.01.2024
Timing
08.01.2024 - 30.04.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Campus
Kupittaa Campus
Teaching languages
- Finnish
Teachers
- Tommi Metso
Objective
After completing the course the student:
• Understand the impact of product design on product life cycle costs
• Understand LEAN principles from a design perspective
Content
- DFM
- DFA
- LEAN tuotekehitys
Materials
E-book
Developing new products and services : learning, differentiation, and innovation
Sanders, G. Lawrence ; Huefner, Ronald J.
Business Expert Press cop. 2012. 1st ed
Design for manufacturing : a structured approach
Teaching methods
Teacher-centered learning methods
-tutorial on materials and software in use
Student-centered learning method
-independent data search
Functional learning methods
-cost management exercises
-simulations
International connections
project Based Learning
Flipped Learning
Completion alternatives
Reporting an independently completed project
Student workload
contact lesson 16 h
self study 32 h
collaborative study 39 h
Content scheduling
Course Objectives
After completing the course, the student:
understand the impact of product design on product lifecycle costs
understands LEAN principles from a design perspective
Course contents
DFM
DFA
LEAN product development
Teamcenter Product Cost Management
Evaluation scale
H-5
Assessment methods and criteria
The five themes and related feedback are rated on a scale of 0-5, both as a peer review and by the lecturer.
The evaluation criteria can be found in the ITsLearning environment for each task separately.
Enrollment
01.06.2023 - 04.09.2023
Timing
04.09.2023 - 15.12.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Campus
Kupittaa Campus
Teaching languages
- Finnish
Teachers
- Tommi Metso
Groups
-
KMMMODTuotekehitysprosessi
Objective
After completing the course the student:
• Understand the impact of product design on product life cycle costs
• Understand LEAN principles from a design perspective
Content
- DFM
- DFA
- LEAN tuotekehitys
Materials
E-book
Developing new products and services : learning, differentiation, and innovation
Sanders, G. Lawrence ; Huefner, Ronald J.
Business Expert Press cop. 2012. 1st ed
Design for manufacturing : a structured approach
Teaching methods
Teacher-centered learning methods
-tutorial on materials and software in use
Student-centered learning method
-independent data search
Functional learning methods
-cost management exercises
-simulations
International connections
project Based Learning
Flipped Learning
Completion alternatives
Reporting an independently completed project
Student workload
contact lesson 16 h
self study 32 h
collaborative study 39 h
Content scheduling
Course Objectives
After completing the course, the student:
understand the impact of product design on product lifecycle costs
understands LEAN principles from a design perspective
Course contents
DFM
DFA
LEAN product development
Teamcenter Product Cost Management
Evaluation scale
H-5
Assessment methods and criteria
The five themes and related feedback are rated on a scale of 0-5, both as a peer review and by the lecturer.
The evaluation criteria can be found in the ITsLearning environment for each task separately.
Enrollment
05.12.2022 - 15.01.2023
Timing
09.01.2023 - 28.04.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Campus
Kupittaa Campus
Teaching languages
- Finnish
Teachers
- Tommi Metso
Groups
-
KMMMODTuotekehitysprosessi
Objective
After completing the course the student:
• Understand the impact of product design on product life cycle costs
• Understand LEAN principles from a design perspective
Content
- DFM
- DFA
- LEAN tuotekehitys
Materials
E-book
Developing new products and services : learning, differentiation, and innovation
Sanders, G. Lawrence ; Huefner, Ronald J.
Business Expert Press cop. 2012. 1st ed
Design for manufacturing : a structured approach
Teaching methods
Teacher-centered learning methods
-tutorial on materials and software in use
Student-centered learning method
-independent data search
Functional learning methods
-cost management exercises
-simulations
International connections
project Based Learning
Flipped Learning
Completion alternatives
Reporting an independently completed project
Student workload
contact lesson 16 h
self study 32 h
collaborative study 39 h
Content scheduling
Course Objectives
After completing the course, the student:
understand the impact of product design on product lifecycle costs
understands LEAN principles from a design perspective
Course contents
DFM
DFA
LEAN product development
Teamcenter Product Cost Management
Evaluation scale
H-5
Assessment methods and criteria
The five themes and related feedback are rated on a scale of 0-5, both as a peer review and by the lecturer.
The evaluation criteria can be found in the ITsLearning environment for each task separately.
Enrollment
01.06.2022 - 04.09.2022
Timing
29.08.2022 - 23.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Campus
Kupittaa Campus
Teaching languages
- Finnish
Teachers
- Tommi Metso
Groups
-
KMMMODTuotekehitysprosessi
Objective
After completing the course the student:
• Understand the impact of product design on product life cycle costs
• Understand LEAN principles from a design perspective
Content
- DFM
- DFA
- LEAN tuotekehitys
Materials
E-book
Developing new products and services : learning, differentiation, and innovation
Sanders, G. Lawrence ; Huefner, Ronald J.
Business Expert Press cop. 2012. 1st ed
Design for manufacturing : a structured approach
Teaching methods
Teacher-centered learning methods
-tutorial on materials and software in use
Student-centered learning method
-independent data search
Functional learning methods
-cost management exercises
-simulations
International connections
project Based Learning
Flipped Learning
Completion alternatives
Reporting an independently completed project
Student workload
contact lesson 16 h
self study 32 h
collaborative study 39 h
Content scheduling
Course Objectives
After completing the course, the student:
understand the impact of product design on product lifecycle costs
understands LEAN principles from a design perspective
Course contents
DFM
DFA
LEAN product development
Teamcenter Product Cost Management
Evaluation scale
H-5
Assessment methods and criteria
The five themes and related feedback are rated on a scale of 0-5, both as a peer review and by the lecturer.
The evaluation criteria can be found in the ITsLearning environment for each task separately.
Enrollment
11.12.2021 - 09.01.2022
Timing
09.01.2022 - 29.04.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Campus
Sepänkatu
Teaching languages
- Finnish
Teachers
- Tommi Metso
Groups
-
KMMMODTuotekehitysprosessi
Objective
After completing the course the student:
• Understand the impact of product design on product life cycle costs
• Understand LEAN principles from a design perspective
Content
- DFM
- DFA
- LEAN tuotekehitys
Materials
E-book
Developing new products and services : learning, differentiation, and innovation
Sanders, G. Lawrence ; Huefner, Ronald J.
Business Expert Press cop. 2012. 1st ed
Design for manufacturing : a structured approach
Teaching methods
Teacher-centered learning methods
-tutorial on materials and software in use
Student-centered learning method
-independent data search
Functional learning methods
-cost management exercises
-simulations
International connections
project Based Learning
Flipped Learning
Completion alternatives
Reporting an independently completed project
Student workload
contact lesson 16 h
self study 32 h
collaborative study 39 h
Content scheduling
Course Objectives
After completing the course, the student:
understand the impact of product design on product lifecycle costs
understands LEAN principles from a design perspective
Course contents
DFM
DFA
LEAN product development
Teamcenter Product Cost Management
Evaluation scale
H-5
Assessment methods and criteria
The five themes and related feedback are rated on a scale of 0-5, both as a peer review and by the lecturer.
The evaluation criteria can be found in the ITsLearning environment for each task separately.