Skip to main content
Link list

Study Guide

Choose language
system.sr-kielenvaihto_fi system.sr-kielenvaihto_en

3D ModellingLaajuus (5 cr)

Code: 5031281

Credits

5 op

Objective

After completing the course the student:
- understand the principles of feature modelling

- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.

- can create parts and assemblies,drawings and edit the parts and assemblies

- understand the basics of surface modelling and sheet metal modelling

Content

- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal

Open in new tab
Enrollment

03.08.2024 - 06.09.2024

Timing

09.09.2024 - 18.12.2024

Number of ECTS credits allocated

5 op

Mode of delivery

Contact teaching

Unit

Engineering and Business

Campus

Kupittaa Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mika Seppänen
  • Kimmo Metsämäki
Teacher in charge

Mika Seppänen

Scheduling groups
  • PKONTK24A 1 (Size: 35. Open UAS: 0.)
  • PKONTK24A 2 (Size: 35. Open UAS: 0.)
  • PKONTK24B 1 (Size: 35. Open UAS: 0.)
  • PKONTK24B 2 (Size: 35. Open UAS: 0.)
Groups
  • PKONTK24
  • PKONTK24A
    PKONTK24A
  • PKONTK24B
    PKONTK24B
Small groups
  • 1
  • 2
  • 3
  • 4

Objective

After completing the course the student:
- understand the principles of feature modelling

- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.

- can create parts and assemblies,drawings and edit the parts and assemblies

- understand the basics of surface modelling and sheet metal modelling

Content

- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal

Materials

The programs' guidebooks, exercises and electronic "Help" material.

Teaching methods

Task-specific instructions given by the teacher, exercises done in class and independent work.

Exam schedules

Week
Week 1/2025

International connections

Learning by doing, independent work and, understanding of the impact of technical solutions on the environment and the economy

Completion alternatives

-

Student workload

The course consists of contact teaching, class work and independent work.
Contact teaching basically 12h/credit, independent work 15h/credit. The time and place indicated in the agenda.
Late returns affects the course grade.

Content scheduling

Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, and visualization.

Further information

ItsLearning- Course-specific workspace.

Evaluation scale

H-5

Assessment methods and criteria

Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes

Assessment criteria, fail (0)

Agreed tasks have not been returned to the Itslearning course-specific return box.

Assessment criteria, satisfactory (1-2)

Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.

Assessment criteria, good (3-4)

All tasks (grade (3-4)) completed well and carefully.

Assessment criteria, excellent (5)

All tasks (grade 5) completed well and carefully.

Open in new tab
Enrollment

01.12.2023 - 08.01.2024

Timing

08.01.2024 - 31.05.2024

Number of ECTS credits allocated

5 op

Mode of delivery

Contact teaching

Unit

Engineering and Business

Campus

Kupittaa Campus

Teaching languages
  • Finnish
Seats

60 - 140

Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mika Seppänen
  • Kimmo Metsämäki
Teacher in charge

Mika Seppänen

Scheduling groups
  • PKONTS23 A1 (Size: 35. Open UAS: 0.)
  • PKONTS23 A2 (Size: 35. Open UAS: 0.)
  • PKONTS23 B1 (Size: 35. Open UAS: 0.)
  • PKONTS23 B2 (Size: 35. Open UAS: 0.)
Groups
  • PKONTS23A
    PKONTS23A
  • PKONTS23B
    PKONTS23B
  • PKONTS23
Small groups
  • PKONTS23 A1
  • PKONTS23 A2
  • PKONTS23 B1
  • PKONTS23 B2

Objective

After completing the course the student:
- understand the principles of feature modelling

- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.

- can create parts and assemblies,drawings and edit the parts and assemblies

- understand the basics of surface modelling and sheet metal modelling

Content

- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal

Materials

The programs' guidebooks, exercises and electronic "Help" material.

Teaching methods

Task-specific instructions given by the teacher, exercises done in class and independent work.

International connections

Learning by doing, independent work and self-evaluation.

Completion alternatives

-

Student workload

The course consists of contact teaching, class work and independent work.
Contact teaching basically 12-13h/credit, independent work 15h/credit. The time and place indicated in the agenda.
Late returns affects the course grade.

Content scheduling

Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, and visualization.

Further information

ItsLearning- Course-specific workspace.

Evaluation scale

H-5

Assessment methods and criteria

Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes

Assessment criteria, fail (0)

Agreed tasks have not been returned to the Itslearning course-specific return box.

Assessment criteria, satisfactory (1-2)

Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.

Assessment criteria, good (3-4)

All tasks completed well and carefully.

Assessment criteria, excellent (5)

In addition to carefully performed tasks, commendable skills have been demonstrated, for example through additional tasks.

Open in new tab
Enrollment

01.06.2023 - 04.09.2023

Timing

04.09.2023 - 15.12.2023

Number of ECTS credits allocated

5 op

Mode of delivery

Contact teaching

Unit

Engineering and Business

Campus

Kupittaa Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Kimmo Metsämäki
  • Mika Seppänen
Teacher in charge

Mika Seppänen

Scheduling groups
  • PKONTK23A1 (Size: 30. Open UAS: 0.)
  • PKONTK23A2 (Size: 30. Open UAS: 0.)
  • PKONTK23B1 (Size: 30. Open UAS: 0.)
  • PKONTK23B2 (Size: 30. Open UAS: 0.)
Groups
  • PKONTK23B
    PKONTK23B
  • PKONTK23
  • PKONTK23A
    PKONTK23A
Small groups
  • 1
  • 2
  • 3
  • 4

Objective

After completing the course the student:
- understand the principles of feature modelling

- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.

- can create parts and assemblies,drawings and edit the parts and assemblies

- understand the basics of surface modelling and sheet metal modelling

Content

- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal

Materials

The programs' guidebooks, exercises and electronic "Help" material.

Teaching methods

Task-specific instructions given by the teacher, exercises done in class and independent work.

International connections

Learning by doing, independent work and self-evaluation.

Completion alternatives

-

Student workload

The course consists of contact teaching, class work and independent work.
Contact teaching basically 12-13h/credit, independent work 15h/credit. The time and place indicated in the agenda.
The course ends with an independent exercise. The exercise will be returned no later than two weeks after the last contact time of the course. Late return affects the course grade.

Content scheduling

Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, sheet metal tooling basics, surface modeling and visualization.

Further information

ItsLearning- Course-specific workspace.

Evaluation scale

H-5

Assessment methods and criteria

Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes

Assessment criteria, fail (0)

Agreed tasks have not been returned to the Itslearning course-specific return box.

Assessment criteria, satisfactory (1-2)

Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.

Assessment criteria, good (3-4)

All tasks completed well and carefully.

Assessment criteria, excellent (5)

In addition to carefully performed tasks, commendable skills have been demonstrated, for example through additional tasks.

Open in new tab
Enrollment

02.12.2022 - 11.01.2023

Timing

09.01.2023 - 21.05.2023

Number of ECTS credits allocated

5 op

Mode of delivery

Contact teaching

Unit

Engineering and Business

Teaching languages
  • Finnish
Teachers
  • Mika Seppänen
  • Kimmo Metsämäki
Teacher in charge

Mika Seppänen

Scheduling groups
  • PKONTS22 A1 (Size: 35. Open UAS: 0.)
  • PKONTS22 A2 (Size: 35. Open UAS: 0.)
  • PKONTS22 B1 (Size: 35. Open UAS: 0.)
  • PKONTS22 B2 (Size: 35. Open UAS: 0.)
Groups
  • PKONTS22B
    PKONTS22B
  • PKONTS22A
    PKONTS22A
  • PKONTS22
Small groups

Objective

After completing the course the student:
- understand the principles of feature modelling

- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.

- can create parts and assemblies,drawings and edit the parts and assemblies

- understand the basics of surface modelling and sheet metal modelling

Content

- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal

Materials

The programs' guidebooks, exercises and electronic "Help" material.

Teaching methods

Task-specific instructions given by the teacher, exercises done in class and independent work.

International connections

Learning by doing, independent work and self-evaluation.

Completion alternatives

-

Student workload

The course consists of contact teaching, class work and independent work.
Contact teaching basically 12-13h/credit, independent work 15h/credit. The time and place indicated in the agenda.
The course ends with an independent exercise. The exercise will be returned no later than two weeks after the last contact time of the course. Late return affects the course grade.

Content scheduling

Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, sheet metal tooling basics, surface modeling and visualization.

Further information

ItsLearning- Course-specific workspace.

Evaluation scale

H-5

Assessment methods and criteria

Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes

Assessment criteria, fail (0)

Agreed tasks have not been returned to the Itslearning course-specific return box.

Assessment criteria, satisfactory (1-2)

Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.

Assessment criteria, good (3-4)

All tasks completed well and carefully.

Assessment criteria, excellent (5)

In addition to carefully performed tasks, commendable skills have been demonstrated, for example through additional tasks.

Open in new tab
Enrollment

02.08.2022 - 15.09.2022

Timing

05.09.2022 - 18.12.2022

Number of ECTS credits allocated

5 op

Mode of delivery

Contact teaching

Unit

Engineering and Business

Campus

Kupittaa Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Markku Seppälä
  • Mika Seppänen
Teacher in charge

Mika Seppänen

Scheduling groups
  • PKONTK22A_Ryhmä1 (Size: 0. Open UAS: 0.)
  • PKONTK22A_Ryhmä 2 (Size: 0. Open UAS: 0.)
  • PKONTK22B_Ryhmä1 (Size: 0. Open UAS: 0.)
  • PKONTK22B_Ryhmä2 (Size: 0. Open UAS: 0.)
Groups
  • PKONTK22A
    PKONTK22A
  • PKONTK22B
    PKONTK22B
  • PKONTK22
Small groups
  • Pienryhmä 1
  • Pienryhmä 2
  • Pienryhmä 3
  • Pienryhmä 4

Objective

After completing the course the student:
- understand the principles of feature modelling

- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.

- can create parts and assemblies,drawings and edit the parts and assemblies

- understand the basics of surface modelling and sheet metal modelling

Content

- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal

Materials

The programs' guidebooks, exercises and electronic "Help" material.

Teaching methods

Task-specific instructions given by the teacher, exercises done in class and independent work.

International connections

Learning by doing, independent work and self-evaluation.

Completion alternatives

-

Student workload

The course consists of contact teaching, class work and independent work.
Contact teaching basically 12-13h/credit, independent work 15h/credit. The time and place indicated in the agenda.
The course ends with an independent exercise. The exercise will be returned no later than two weeks after the last contact time of the course. Late return affects the course grade.

Content scheduling

Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, sheet metal tooling basics, surface modeling and visualization.

Further information

ItsLearning- Course-specific workspace.

Evaluation scale

H-5

Assessment methods and criteria

Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes

Assessment criteria, fail (0)

Agreed tasks have not been returned to the Itslearning course-specific return box.

Assessment criteria, satisfactory (1-2)

Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.

Assessment criteria, good (3-4)

All tasks completed well and carefully.

Assessment criteria, excellent (5)

In addition to carefully performed tasks, commendable skills have been demonstrated, for example through additional tasks.

Open in new tab
Enrollment

11.12.2021 - 31.01.2022

Timing

10.01.2022 - 31.05.2022

Number of ECTS credits allocated

5 op

Mode of delivery

Contact teaching

Unit

Engineering and Business

Campus

Kupittaa Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Markku Seppälä
  • Mika Seppänen
Teacher in charge

Mika Seppänen

Scheduling groups
  • PKONTS21A Ryhmä1 (Size: 35. Open UAS: 0.)
  • PKONTS21A Ryhmä2 (Size: 35. Open UAS: 0.)
  • PKONTS21B Ryhmä1 (Size: 35. Open UAS: 0.)
  • PKONTS21B Ryhmä2 (Size: 35. Open UAS: 0.)
Groups
  • PKONTS21B
    PKONTS21B
  • PKONTS21A
    PKONTS21A
  • PKONTS21
Small groups
  • PKONTS21A Ryhmä1
  • PKONTS21A Ryhmä2
  • PKONTS21B Ryhmä1
  • PKONTS21B Ryhmä2

Objective

After completing the course the student:
- understand the principles of feature modelling

- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.

- can create parts and assemblies,drawings and edit the parts and assemblies

- understand the basics of surface modelling and sheet metal modelling

Content

- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal

Evaluation scale

H-5