Lean BasicsLaajuus (1 op)
Tunnus: TE00BS89
Laajuus
1 op
Osaamistavoitteet
The aim of this course is to give the student an overview of Lean and how it contributes to companies and service functions in improving their cost effectiveness and creating a positive work atmosphere.
Sisältö
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Ilmoittautumisaika
15.03.2024 - 15.05.2024
Ajoitus
15.03.2024 - 15.08.2024
Opintopistemäärä
1 op
Virtuaaliosuus
1 op
Toteutustapa
Etäopetus
Yksikkö
Kemianteollisuus
Toimipiste
Paikasta riippumaton
Opetuskielet
- Englanti
Paikat
10 - 100
Koulutus
- Bio- ja kemiantekniikan koulutus
- Avoin ammattikorkeakoulu
- Ammattikorkeakoulun yhteiset vapaasti valittavat opinnot
- Ammattikorkeakoulun yhteiset vapaasti valittavat (YAMK)
Opettaja
- Piritta Saipa
Ajoitusryhmät
- Avoimen AMK:n kiintiöpaikat. Ilmoittaudu ilman tätä pienryhmää (Koko: 10. Avoin AMK: 10.)
Ryhmät
-
MKEMIK23Kemiantekniikan koulutus
-
PBIOKES20Bio- ja kemiantekniikan koulutus
-
MKEMIK22Kemiantekniikan koulutus
-
MKEMIK24Kemiantekniikan koulutus
-
VAVA2425Ammattikorkeakoulun yhteiset vapaasti valittavat
-
PBIOKES21Bio- ja kemiantekniikan koulutus
-
MKEMIK21Kemiantekniikan koulutus
-
VAVA2324Ammattikorkeakoulun yhteiset vapaasti valittavat
-
PBIOKES23Bio- ja kemiantekniikan koulutus
-
AAMKAvoimen opiskelijat
-
PBIOKES22Bio- ja kemiantekniikan koulutus
Pienryhmät
- Avoimen AMK:n kiintiöpaikat. Ilmoittaudu ilman tätä pienryhmää
Tavoitteet
The aim of this course is to give the student an overview of Lean and how it contributes to companies and service functions in improving their cost effectiveness and creating a positive work atmosphere.
Sisältö
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Oppimateriaalit
Learning materials can be found in Itslearning environment.
Opetusmenetelmät
• On-line videos and lectures
• Independent learning - Youtube videos and articles from the web
• Independent exercises
• A final quiz
• Learning diary with assignments and tasks (done individually)
The course is designed for individual studies without teacher involvement other than in the evaluation phase.
Tenttien ajankohdat ja uusintamahdollisuudet
N/A
Pedagogiset toimintatavat ja kestävä kehitys
Instructed independent work, 100 % online.
Toteutuksen valinnaiset suoritustavat
N/A
Opiskelijan ajankäyttö ja kuormitus
To be able to grasp the course contents in an optimal way the student is advised to spend approximately 45% of the time on repeatedly listening and reading the specific slide material, 10% of the time on the additional material (Youtube videos, articles) and 45% on the tasks, assignment and questions.
Sisällön jaksotus
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Course material will be available 15.3.2024. The course must be completed not later that 15.8.2024. (Enrollment not later than 15.5.2024)
Viestintäkanava ja lisätietoja
The course is designed for individual studies without teacher involvement other than in the evaluation phase.
(Kiintiöt:
omat + kotimainen liikkuvuus 40
Campusonline 50
Avoin AMK 10)
Arviointiasteikko
Hyväksytty/Hylätty
Arviointimenetelmät ja arvioinnin perusteet
Passed/failed. Approved exercises, quizzes and assignment.
Ilmoittautumisaika
14.08.2023 - 31.08.2023
Ajoitus
01.08.2023 - 31.12.2023
Opintopistemäärä
1 op
Virtuaaliosuus
1 op
Toteutustapa
Etäopetus
Yksikkö
Kemianteollisuus
Opetuskielet
- Englanti
Paikat
0 - 50
Koulutus
- Ammattikorkeakoulun yhteiset vapaasti valittavat opinnot
Opettaja
- Taina Hovinen
- Piritta Saipa
Tavoitteet
The aim of this course is to give the student an overview of Lean and how it contributes to companies and service functions in improving their cost effectiveness and creating a positive work atmosphere.
Sisältö
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Oppimateriaalit
Learning materials can be found in Itslearning environment.
Opetusmenetelmät
• On-line videos and lectures...
• Independent learning - Youtube videos and articles from the web
• Independent exercises
• A final quiz
• Learning diary with assignments and tasks (done individually)
The course is designed for individual studies without teacher involvement other than in the evaluation phase.
Pedagogiset toimintatavat ja kestävä kehitys
Instructed independent work, 100 % online.
Opiskelijan ajankäyttö ja kuormitus
To be able to grasp the course contents in an optimal way the student is advised to spend approximately 45% of the time on repeatedly listening and reading the specific slide material, 10% of the time on the additional material (Youtube videos, articles) and 45% on the tasks, assignment and questions.
Sisällön jaksotus
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Course material will be available 1.9.23. The course must be completed not later that 10.12.2023. (Enrollment not later than 10.10.22.)
Viestintäkanava ja lisätietoja
The course is designed for individual studies without teacher involvement other than in the evaluation phase.
(Kiintiöt:
omat + kotimainen liikkuvuus 40
Campusonline 50
Avoin AMK 10)
Arviointiasteikko
Hyväksytty/Hylätty
Arviointimenetelmät ja arvioinnin perusteet
Passed/failed. Approved exercises, quizzes and answered questions in learning diary
Ilmoittautumisaika
02.07.2023 - 10.09.2023
Ajoitus
01.08.2023 - 31.12.2023
Opintopistemäärä
1 op
Virtuaaliosuus
1 op
Toteutustapa
Etäopetus
Yksikkö
Kemianteollisuus
Opetuskielet
- Englanti
Paikat
40 - 100
Koulutus
- Ammattikorkeakoulun yhteiset vapaasti valittavat opinnot
Opettaja
- Taina Hovinen
- Piritta Saipa
Ajoitusryhmät
- Avoimen AMK:n kiintiöpaikat. Ilmoittaudu ilman tätä pienryhmää (Koko: 10. Avoin AMK: 10.)
Ryhmät
-
PBIOKES19Bio- ja kemiantekniikan koulutus koulutus
-
PBIOKES20Bio- ja kemiantekniikan koulutus
-
PBIOKES21Bio- ja kemiantekniikan koulutus
-
PBIOKES22Bio- ja kemiantekniikan koulutus
Pienryhmät
- Avoimen AMK:n kiintiöpaikat. Ilmoittaudu ilman tätä pienryhmää
Tavoitteet
The aim of this course is to give the student an overview of Lean and how it contributes to companies and service functions in improving their cost effectiveness and creating a positive work atmosphere.
Sisältö
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Oppimateriaalit
Learning materials can be found in Itslearning environment.
Opetusmenetelmät
• On-line videos and lectures...
• Independent learning - Youtube videos and articles from the web
• Independent exercises
• A final quiz
• Learning diary with assignments and tasks (done individually)
The course is designed for individual studies without teacher involvement other than in the evaluation phase.
Pedagogiset toimintatavat ja kestävä kehitys
Instructed independent work, 100 % online.
Opiskelijan ajankäyttö ja kuormitus
To be able to grasp the course contents in an optimal way the student is advised to spend approximately 45% of the time on repeatedly listening and reading the specific slide material, 10% of the time on the additional material (Youtube videos, articles) and 45% on the tasks, assignment and questions.
Sisällön jaksotus
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Course material will be available 1.9.23. The course must be completed not later that 10.12.2023. (Enrollment not later than 10.10.22.)
Viestintäkanava ja lisätietoja
The course is designed for individual studies without teacher involvement other than in the evaluation phase.
(Kiintiöt:
omat + kotimainen liikkuvuus 40
Campusonline 50
Avoin AMK 10)
Arviointiasteikko
Hyväksytty/Hylätty
Arviointimenetelmät ja arvioinnin perusteet
Passed/failed. Approved exercises, quizzes and answered questions in learning diary
Ilmoittautumisaika
15.09.2022 - 10.10.2022
Ajoitus
15.09.2022 - 15.12.2022
Opintopistemäärä
1 op
Toteutustapa
Lähiopetus
Yksikkö
Tekniikka ja liiketoiminta
Opetuskielet
- Englanti
Paikat
30 - 100
Koulutus
- Ammattikorkeakoulun yhteiset vapaasti valittavat opinnot
Opettaja
- Piritta Saipa
Tavoitteet
The aim of this course is to give the student an overview of Lean and how it contributes to companies and service functions in improving their cost effectiveness and creating a positive work atmosphere.
Sisältö
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Oppimateriaalit
Learning materials can be found in Itslearning environment.
Opetusmenetelmät
• On-line videos and lectures...
• Independent learning - Youtube videos and articles from the web
• Independent exercises
• A final quiz
• Learning diary with assignments and tasks (done individually)
The course is designed for individual studies without teacher involvement other than in the evaluation phase.
Pedagogiset toimintatavat ja kestävä kehitys
Instructed independent work, 100 % online.
Opiskelijan ajankäyttö ja kuormitus
To be able to grasp the course contents in an optimal way the student is advised to spend approximately 45% of the time on repeatedly listening and reading the specific slide material, 10% of the time on the additional material (Youtube videos, articles) and 45% on the tasks, assignment and questions.
Sisällön jaksotus
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Course material will be available 1.10.22. The course must be completed not later that 15.12.2022. (Enrollment not later than 10.10.22.)
Viestintäkanava ja lisätietoja
The course is designed for individual studies without teacher involvement other than in the evaluation phase.
Arviointiasteikko
Hyväksytty/Hylätty
Arviointimenetelmät ja arvioinnin perusteet
Passed/failed. Approved exercises, quizzes and answered questions in learning diary
Ilmoittautumisaika
02.06.2022 - 19.06.2022
Ajoitus
21.06.2022 - 30.09.2022
Opintopistemäärä
1 op
Virtuaaliosuus
1 op
Toteutustapa
Etäopetus
Opetuskielet
- Englanti
Koulutus
- Kemiantekniikan koulutus
Opettaja
- Mari Ketola
Tavoitteet
The aim of this course is to give the student an overview of Lean and how it contributes to companies and service functions in improving their cost effectiveness and creating a positive work atmosphere.
Sisältö
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Oppimateriaalit
Learning materials can be found in Itslearning environment.
Opetusmenetelmät
• On-line videos and lectures...
• Independent learning - Youtube videos and articles from the web
• Independent exercises
• A final quiz
• Learning diary with assignments and tasks (done individually)
The course is designed for individual studies without teacher involvement other than in the evaluation phase.
Pedagogiset toimintatavat ja kestävä kehitys
Instructed independent work, 100 % online.
Opiskelijan ajankäyttö ja kuormitus
To be able to grasp the course contents in an optimal way the student is advised to spend approximately 45% of the time on repeatedly listening and reading the specific slide material, 10% of the time on the additional material (Youtube videos, articles) and 45% on the tasks, assignment and questions.
Sisällön jaksotus
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Course material will be available 21.6.22. The course must be completed not later that 30.9.2022. (Enrollment not later than 19.6.22.)
Viestintäkanava ja lisätietoja
The course is designed for individual studies without teacher involvement other than in the evaluation phase.
Arviointiasteikko
Hyväksytty/Hylätty
Arviointimenetelmät ja arvioinnin perusteet
Passed/failed. Approved exercises, quizzes and answered questions in learning diary
Ilmoittautumisaika
14.03.2022 - 30.04.2022
Ajoitus
01.03.2022 - 15.06.2022
Opintopistemäärä
1 op
Virtuaaliosuus
1 op
Toteutustapa
Etäopetus
Yksikkö
Tekniikka ja liiketoiminta
Opetuskielet
- Englanti
Paikat
30 - 100
Koulutus
- Bio- ja kemiantekniikan koulutus
Opettaja
- Taina Hovinen
- Piritta Saipa
Ajoitusryhmät
- Pienryhmä 1 (Koko: 80. Avoin AMK: 80.)
Pienryhmät
- Pienryhmä 1
Tavoitteet
The aim of this course is to give the student an overview of Lean and how it contributes to companies and service functions in improving their cost effectiveness and creating a positive work atmosphere.
Sisältö
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Oppimateriaalit
Learning materials can be found in its learning environment.
Opetusmenetelmät
• On-line videos and lectures...
• Independent learning - Youtube videos and articles from the web
• Independent exercises
• A final quiz
• Learning diary with assignments and tasks (done individually)
The course is designed for individual studies without teacher involvement other than in the evaluation phase.
Pedagogiset toimintatavat ja kestävä kehitys
Instructed independent work
Opiskelijan ajankäyttö ja kuormitus
To be able to grasp the course contents in an optimal way the student is advised to spend approximately 45% of the time on repeatedly listening and reading the specific slide material, 10% of the time on the additional material (Youtube videos, articles) and 45% on the tasks, assignment and questions.
Sisällön jaksotus
This course consists of five chapters:
• Introduction to Lean
• Lean In Many Environments
• The Five Principles of Lean
• Lean and Six Sigma
• A Few Words about Implementing Lean
Viestintäkanava ja lisätietoja
The course is designed for individual studies without teacher involvement other than in the evaluation phase.
Kiintiöt:
Omat + kotimainen liikkuvuus 49
Campusonline 40
Avoin AMK 11
Arviointiasteikko
Hyväksytty/Hylätty
Arviointimenetelmät ja arvioinnin perusteet
Passed/failed. Approved exercises, quizzes and answered questions in learning diary