Fluid mechanics and heat transferLaajuus (5 cr)
Code: 5031260
Credits
5 op
Objective
After completing the course, the student can:
- calculate the pressure dropin the piping
- size the piping system and choose a suitable pump
- size the pressure air system and choose a suitable compressor
- choose the insulation thickness and calculate the heat loss
- determine the size and choose the type of the heat exchanger.
Content
- Fluid mechanics
- Pumps and piping
- Fans and compressors
- Heat transfer
- Insulation
- Heat exchangers
Enrollment
01.12.2024 - 13.01.2025
Timing
13.01.2025 - 30.04.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Kari Nieminen
Teacher in charge
Kari Nieminen
Groups
-
KMMMODEnergiaJaPolttomoottoritekniikka
Objective
After completing the course, the student can:
- calculate the pressure dropin the piping
- size the piping system and choose a suitable pump
- size the pressure air system and choose a suitable compressor
- choose the insulation thickness and calculate the heat loss
- determine the size and choose the type of the heat exchanger.
Content
- Fluid mechanics
- Pumps and piping
- Fans and compressors
- Heat transfer
- Insulation
- Heat exchangers
Evaluation scale
H-5
Enrollment
01.06.2024 - 02.09.2024
Timing
02.09.2024 - 06.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Kari Nieminen
Teacher in charge
Kari Nieminen
Groups
-
KMMMODEnergiaJaPolttomoottoritekniikka
Objective
After completing the course, the student can:
- calculate the pressure dropin the piping
- size the piping system and choose a suitable pump
- size the pressure air system and choose a suitable compressor
- choose the insulation thickness and calculate the heat loss
- determine the size and choose the type of the heat exchanger.
Content
- Fluid mechanics
- Pumps and piping
- Fans and compressors
- Heat transfer
- Insulation
- Heat exchangers
Evaluation scale
H-5
Enrollment
01.12.2023 - 08.01.2024
Timing
08.01.2024 - 26.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Seats
0 - 25
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Jari Lahtinen
Teacher in charge
Jari Lahtinen
Groups
-
KMMMODEnergiaJaPolttomoottoritekniikka
Objective
After completing the course, the student can:
- calculate the pressure dropin the piping
- size the piping system and choose a suitable pump
- size the pressure air system and choose a suitable compressor
- choose the insulation thickness and calculate the heat loss
- determine the size and choose the type of the heat exchanger.
Content
- Fluid mechanics
- Pumps and piping
- Fans and compressors
- Heat transfer
- Insulation
- Heat exchangers
Materials
Learning material will be available in ITS-system
Teaching methods
Learning by doing
Exam schedules
-Exam at week 16, exact day and time based on common weekly plan
-Two additional exams
International connections
Theory lectures, exercises, practical works
Completion alternatives
Approved equal studies
Student workload
135 hours = 17 working days = 3.4 weeks
Content scheduling
-Fluid mechanics
-Pumps and pipings
-Fans and compressors
-Heat transfer
-Insulations
-Heat exchangers
Further information
Jari M. Lahtinen
+358505985679
jari.lahtinen@turkuamk.f
Evaluation scale
H-5
Assessment methods and criteria
Grading: 0-5
-Exam effect 70%
-Team assignments 30%
-Homework additional points max.20%
Assessment criteria, fail (0)
Points < 35 %
Assessment criteria, satisfactory (1-2)
1) 35 % < points < 48 %
2) 48 % < points < 61 %
Assessment criteria, good (3-4)
3) 61 % < pisteet < 74 %
4) 74 % < pisteet < 87 %
Assessment criteria, excellent (5)
5) 87 % < points
Enrollment
01.06.2023 - 04.09.2023
Timing
04.09.2023 - 15.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Jari Lahtinen
Teacher in charge
Jari Lahtinen
Groups
-
KMMMODEnergiaJaPolttomoottoritekniikka
Objective
After completing the course, the student can:
- calculate the pressure dropin the piping
- size the piping system and choose a suitable pump
- size the pressure air system and choose a suitable compressor
- choose the insulation thickness and calculate the heat loss
- determine the size and choose the type of the heat exchanger.
Content
- Fluid mechanics
- Pumps and piping
- Fans and compressors
- Heat transfer
- Insulation
- Heat exchangers
Materials
Learning material will be available in ITS-system
Teaching methods
Learning by doing
Exam schedules
-Exam at week 49
-First additional exam in January 24
-Second additional exam in February 24
International connections
Theory lectures, exercises, practical works
Completion alternatives
Approved equal studies
Student workload
135 hours = 17 working days = 3.4 weeks
Content scheduling
-Fluid mechanics
-Pumps and pipings
-Fans and compressors
-Heat transfer
-Insulations
-Heat exchangers
Further information
Jari M. Lahtinen
+358505985679
jari.lahtinen@turkuamk.fi
Evaluation scale
H-5
Assessment methods and criteria
Grading: 0-5
-Exam effect 60%
-Team assignments 25%
-Homework additional points max.15%
Assessment criteria, fail (0)
Points < 35 %
Assessment criteria, satisfactory (1-2)
1) 35 % < points < 48 %
2) 48 % < points < 61 %
Assessment criteria, good (3-4)
3) 61 % < pisteet < 74 %
4) 74 % < pisteet < 87 %
Assessment criteria, excellent (5)
5) 87 % < points
Enrollment
10.12.2022 - 08.01.2023
Timing
09.01.2023 - 28.04.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Jari Lahtinen
Teacher in charge
Jari Lahtinen
Groups
-
KMMMODEnergiaJaPolttomoottoritekniikka
Objective
After completing the course, the student can:
- calculate the pressure dropin the piping
- size the piping system and choose a suitable pump
- size the pressure air system and choose a suitable compressor
- choose the insulation thickness and calculate the heat loss
- determine the size and choose the type of the heat exchanger.
Content
- Fluid mechanics
- Pumps and piping
- Fans and compressors
- Heat transfer
- Insulation
- Heat exchangers
Materials
Learning material will be available in ITS-system
Teaching methods
Learning by doing
Exam schedules
-Exam at week 49
-First additional exam in January 11.1.2023
-Second additional exam in February 1.2.2023
International connections
Theory lectures, exercises, practical works
Completion alternatives
Approved equal studies
Student workload
135 hours = 17 working days = 3.4 weeks
Content scheduling
-Fluid mechanics
-Pumps and pipings
-Fans and compressors
-Heat transfer
-Insulations
-Heat exchangers
Further information
Jari M. Lahtinen
+358505985679
jari.lahtinen@turkuamk.fi
Evaluation scale
H-5
Assessment methods and criteria
Grading: 0-5
-Exam effect max. 60%
-Homework max.15%
-Team assignment max. 25%
Assessment criteria, fail (0)
Points < 35 %
Assessment criteria, satisfactory (1-2)
1) 35 % < points < 48 %
2) 48 % < points < 61 %
Assessment criteria, good (3-4)
3) 61 % < pisteet < 74 %
4) 74 % < pisteet < 87 %
Assessment criteria, excellent (5)
5) 87 % < points
Enrollment
06.08.2022 - 04.09.2022
Timing
05.09.2022 - 16.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Jari Lahtinen
Teacher in charge
Jari Lahtinen
Groups
-
KMMMODEnergiaJaPolttomoottoritekniikka
Objective
After completing the course, the student can:
- calculate the pressure dropin the piping
- size the piping system and choose a suitable pump
- size the pressure air system and choose a suitable compressor
- choose the insulation thickness and calculate the heat loss
- determine the size and choose the type of the heat exchanger.
Content
- Fluid mechanics
- Pumps and piping
- Fans and compressors
- Heat transfer
- Insulation
- Heat exchangers
Materials
Learning material will be available in ITS-system
Teaching methods
Learning by doing
Exam schedules
-Exam at week 49
-First additional exam in January 11.1.2023
-Second additional exam in February 1.2.2023
International connections
Theory lectures, exercises, practical works
Completion alternatives
Approved equal studies
Student workload
135 hours = 17 working days = 3.4 weeks
Content scheduling
-Fluid mechanics
-Pumps and pipings
-Fans and compressors
-Heat transfer
-Insulations
-Heat exchangers
Further information
Jari M. Lahtinen
+358505985679
jari.lahtinen@turkuamk.fi
Evaluation scale
H-5
Assessment methods and criteria
Grading: 0-5
-Exam effect max. 60%
-Homework max.15%
-Team assignment max. 25%
Assessment criteria, fail (0)
Points < 35 %
Assessment criteria, satisfactory (1-2)
1) 35 % < points < 48 %
2) 48 % < points < 61 %
Assessment criteria, good (3-4)
3) 61 % < pisteet < 74 %
4) 74 % < pisteet < 87 %
Assessment criteria, excellent (5)
5) 87 % < points
Enrollment
11.12.2021 - 09.01.2022
Timing
10.01.2022 - 30.04.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Jari Lahtinen
Teacher in charge
Jari Lahtinen
Groups
-
KMMMODEnergiaJaPolttomoottoritekniikka
Objective
After completing the course, the student can:
- calculate the pressure dropin the piping
- size the piping system and choose a suitable pump
- size the pressure air system and choose a suitable compressor
- choose the insulation thickness and calculate the heat loss
- determine the size and choose the type of the heat exchanger.
Content
- Fluid mechanics
- Pumps and piping
- Fans and compressors
- Heat transfer
- Insulation
- Heat exchangers
Materials
Informed in Teams
Teaching methods
Learning by doing
Exam schedules
Exam at week 16, two additional exams
International connections
Theory lectures, exercises, practical works
Completion alternatives
Approved equal studies
Student workload
135 hours = 17 working days = 3.4 weeks
Content scheduling
-Fluid mechanics
-Pumps and pipings
-Fans and compressors
-Heat transfer
-Insulations
-Heat exchangers
Further information
Jari M. Lahtinen
+358505985679
jari.lahtinen@turkuamk.fi
Evaluation scale
H-5
Assessment methods and criteria
Exams are evaluated 0-5, practical works approved - to be improved
Assessment criteria, fail (0)
Points < 35 %
Assessment criteria, satisfactory (1-2)
1) 35 % < points < 48 %
2) 48 % < points < 61 %
Assessment criteria, good (3-4)
3) 61 % < pisteet < 74 %
4) 74 % < pisteet < 87 %
Assessment criteria, excellent (5)
5) 87 % < points