3D ModellingLaajuus (5 cr)
Code: 5031281
Credits
5 op
Objective
After completing the course the student:
- understand the principles of feature modelling
- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.
- can create parts and assemblies,drawings and edit the parts and assemblies
- understand the basics of surface modelling and sheet metal modelling
Content
- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal
Enrollment
03.08.2024 - 04.09.2024
Timing
09.09.2024 - 18.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Seppänen
- Kimmo Metsämäki
Teacher in charge
Mika Seppänen
Scheduling groups
- PKONTK24A 1 (Size: 35. Open UAS: 0.)
- PKONTK24A 2 (Size: 35. Open UAS: 0.)
- PKONTK24B 1 (Size: 35. Open UAS: 0.)
- PKONTK24B 2 (Size: 35. Open UAS: 0.)
Groups
-
PKONTK24
-
PKONTK24APKONTK24A
-
PKONTK24BPKONTK24B
Small groups
- 1
- 2
- 3
- 4
Objective
After completing the course the student:
- understand the principles of feature modelling
- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.
- can create parts and assemblies,drawings and edit the parts and assemblies
- understand the basics of surface modelling and sheet metal modelling
Content
- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal
Materials
The programs' guidebooks, exercises and electronic "Help" material.
Teaching methods
Task-specific instructions given by the teacher, exercises done in class and independent work.
Exam schedules
Week
Week 1/2025
International connections
Learning by doing, independent work and, understanding of the impact of technical solutions on the environment and the economy
Completion alternatives
-
Student workload
The course consists of contact teaching, class work and independent work.
Contact teaching basically 12h/credit, independent work 15h/credit. The time and place indicated in the agenda.
Late returns affects the course grade.
Content scheduling
Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, and visualization.
Further information
ItsLearning- Course-specific workspace.
Evaluation scale
H-5
Assessment methods and criteria
Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes
Assessment criteria, fail (0)
Agreed tasks have not been returned to the Itslearning course-specific return box.
Assessment criteria, satisfactory (1-2)
Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.
Assessment criteria, good (3-4)
All tasks (grade (3-4)) completed well and carefully.
Assessment criteria, excellent (5)
All tasks (grade 5) completed well and carefully.
Enrollment
01.12.2023 - 08.01.2024
Timing
08.01.2024 - 31.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Seats
60 - 140
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Seppänen
- Kimmo Metsämäki
Teacher in charge
Mika Seppänen
Scheduling groups
- PKONTS23 A1 (Size: 35. Open UAS: 0.)
- PKONTS23 A2 (Size: 35. Open UAS: 0.)
- PKONTS23 B1 (Size: 35. Open UAS: 0.)
- PKONTS23 B2 (Size: 35. Open UAS: 0.)
Groups
-
PKONTS23APKONTS23A
-
PKONTS23BPKONTS23B
-
PKONTS23
Small groups
- PKONTS23 A1
- PKONTS23 A2
- PKONTS23 B1
- PKONTS23 B2
Objective
After completing the course the student:
- understand the principles of feature modelling
- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.
- can create parts and assemblies,drawings and edit the parts and assemblies
- understand the basics of surface modelling and sheet metal modelling
Content
- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal
Materials
The programs' guidebooks, exercises and electronic "Help" material.
Teaching methods
Task-specific instructions given by the teacher, exercises done in class and independent work.
International connections
Learning by doing, independent work and self-evaluation.
Completion alternatives
-
Student workload
The course consists of contact teaching, class work and independent work.
Contact teaching basically 12-13h/credit, independent work 15h/credit. The time and place indicated in the agenda.
Late returns affects the course grade.
Content scheduling
Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, and visualization.
Further information
ItsLearning- Course-specific workspace.
Evaluation scale
H-5
Assessment methods and criteria
Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes
Assessment criteria, fail (0)
Agreed tasks have not been returned to the Itslearning course-specific return box.
Assessment criteria, satisfactory (1-2)
Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.
Assessment criteria, good (3-4)
All tasks completed well and carefully.
Assessment criteria, excellent (5)
In addition to carefully performed tasks, commendable skills have been demonstrated, for example through additional tasks.
Enrollment
01.06.2023 - 04.09.2023
Timing
04.09.2023 - 15.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Kimmo Metsämäki
- Mika Seppänen
Teacher in charge
Mika Seppänen
Scheduling groups
- PKONTK23A1 (Size: 30. Open UAS: 0.)
- PKONTK23A2 (Size: 30. Open UAS: 0.)
- PKONTK23B1 (Size: 30. Open UAS: 0.)
- PKONTK23B2 (Size: 30. Open UAS: 0.)
Groups
-
PKONTK23BPKONTK23B
-
PKONTK23
-
PKONTK23APKONTK23A
Small groups
- 1
- 2
- 3
- 4
Objective
After completing the course the student:
- understand the principles of feature modelling
- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.
- can create parts and assemblies,drawings and edit the parts and assemblies
- understand the basics of surface modelling and sheet metal modelling
Content
- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal
Materials
The programs' guidebooks, exercises and electronic "Help" material.
Teaching methods
Task-specific instructions given by the teacher, exercises done in class and independent work.
International connections
Learning by doing, independent work and self-evaluation.
Completion alternatives
-
Student workload
The course consists of contact teaching, class work and independent work.
Contact teaching basically 12-13h/credit, independent work 15h/credit. The time and place indicated in the agenda.
The course ends with an independent exercise. The exercise will be returned no later than two weeks after the last contact time of the course. Late return affects the course grade.
Content scheduling
Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, sheet metal tooling basics, surface modeling and visualization.
Further information
ItsLearning- Course-specific workspace.
Evaluation scale
H-5
Assessment methods and criteria
Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes
Assessment criteria, fail (0)
Agreed tasks have not been returned to the Itslearning course-specific return box.
Assessment criteria, satisfactory (1-2)
Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.
Assessment criteria, good (3-4)
All tasks completed well and carefully.
Assessment criteria, excellent (5)
In addition to carefully performed tasks, commendable skills have been demonstrated, for example through additional tasks.
Enrollment
02.12.2022 - 11.01.2023
Timing
09.01.2023 - 21.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Teaching languages
- Finnish
Teachers
- Mika Seppänen
- Kimmo Metsämäki
Teacher in charge
Mika Seppänen
Scheduling groups
- PKONTS22 A1 (Size: 35. Open UAS: 0.)
- PKONTS22 A2 (Size: 35. Open UAS: 0.)
- PKONTS22 B1 (Size: 35. Open UAS: 0.)
- PKONTS22 B2 (Size: 35. Open UAS: 0.)
Groups
-
PKONTS22BPKONTS22B
-
PKONTS22APKONTS22A
-
PKONTS22
Small groups
Objective
After completing the course the student:
- understand the principles of feature modelling
- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.
- can create parts and assemblies,drawings and edit the parts and assemblies
- understand the basics of surface modelling and sheet metal modelling
Content
- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal
Materials
The programs' guidebooks, exercises and electronic "Help" material.
Teaching methods
Task-specific instructions given by the teacher, exercises done in class and independent work.
International connections
Learning by doing, independent work and self-evaluation.
Completion alternatives
-
Student workload
The course consists of contact teaching, class work and independent work.
Contact teaching basically 12-13h/credit, independent work 15h/credit. The time and place indicated in the agenda.
The course ends with an independent exercise. The exercise will be returned no later than two weeks after the last contact time of the course. Late return affects the course grade.
Content scheduling
Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, sheet metal tooling basics, surface modeling and visualization.
Further information
ItsLearning- Course-specific workspace.
Evaluation scale
H-5
Assessment methods and criteria
Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes
Assessment criteria, fail (0)
Agreed tasks have not been returned to the Itslearning course-specific return box.
Assessment criteria, satisfactory (1-2)
Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.
Assessment criteria, good (3-4)
All tasks completed well and carefully.
Assessment criteria, excellent (5)
In addition to carefully performed tasks, commendable skills have been demonstrated, for example through additional tasks.
Enrollment
02.08.2022 - 15.09.2022
Timing
05.09.2022 - 18.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Markku Seppälä
- Mika Seppänen
Teacher in charge
Mika Seppänen
Scheduling groups
- PKONTK22A_Ryhmä1 (Size: 0. Open UAS: 0.)
- PKONTK22A_Ryhmä 2 (Size: 0. Open UAS: 0.)
- PKONTK22B_Ryhmä1 (Size: 0. Open UAS: 0.)
- PKONTK22B_Ryhmä2 (Size: 0. Open UAS: 0.)
Groups
-
PKONTK22APKONTK22A
-
PKONTK22BPKONTK22B
-
PKONTK22
Small groups
- Pienryhmä 1
- Pienryhmä 2
- Pienryhmä 3
- Pienryhmä 4
Objective
After completing the course the student:
- understand the principles of feature modelling
- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.
- can create parts and assemblies,drawings and edit the parts and assemblies
- understand the basics of surface modelling and sheet metal modelling
Content
- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal
Materials
The programs' guidebooks, exercises and electronic "Help" material.
Teaching methods
Task-specific instructions given by the teacher, exercises done in class and independent work.
International connections
Learning by doing, independent work and self-evaluation.
Completion alternatives
-
Student workload
The course consists of contact teaching, class work and independent work.
Contact teaching basically 12-13h/credit, independent work 15h/credit. The time and place indicated in the agenda.
The course ends with an independent exercise. The exercise will be returned no later than two weeks after the last contact time of the course. Late return affects the course grade.
Content scheduling
Basics of 3D modeling, using Siemens NX.
Parametric feature modeling, basic modeling, assemblies, drawings, sheet metal tooling basics, surface modeling and visualization.
Further information
ItsLearning- Course-specific workspace.
Evaluation scale
H-5
Assessment methods and criteria
Continuous assessment, working in hours, mandatory returnable exercises, attendance at classes
Assessment criteria, fail (0)
Agreed tasks have not been returned to the Itslearning course-specific return box.
Assessment criteria, satisfactory (1-2)
Most of the tasks have been returned, but the tasks are incomplete or carried out carelessly.
Assessment criteria, good (3-4)
All tasks completed well and carefully.
Assessment criteria, excellent (5)
In addition to carefully performed tasks, commendable skills have been demonstrated, for example through additional tasks.
Enrollment
11.12.2021 - 31.01.2022
Timing
10.01.2022 - 31.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Engineering and Business
Campus
Kupittaa Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Markku Seppälä
- Mika Seppänen
Teacher in charge
Mika Seppänen
Scheduling groups
- PKONTS21A Ryhmä1 (Size: 35. Open UAS: 0.)
- PKONTS21A Ryhmä2 (Size: 35. Open UAS: 0.)
- PKONTS21B Ryhmä1 (Size: 35. Open UAS: 0.)
- PKONTS21B Ryhmä2 (Size: 35. Open UAS: 0.)
Groups
-
PKONTS21BPKONTS21B
-
PKONTS21APKONTS21A
-
PKONTS21
Small groups
- PKONTS21A Ryhmä1
- PKONTS21A Ryhmä2
- PKONTS21B Ryhmä1
- PKONTS21B Ryhmä2
Objective
After completing the course the student:
- understand the principles of feature modelling
- can create the necessary 2D profiles, relations and dimensions , as well as use this profile to create a three-dimensional part.
- can create parts and assemblies,drawings and edit the parts and assemblies
- understand the basics of surface modelling and sheet metal modelling
Content
- 2d sketch
- relations, dimensions
- basic features (extrude, cut, revolve, loft, circular pattern, fillet, chamfer)
- assembly
- drawings
- surface modeling
- sheet metal
Evaluation scale
H-5