Machining TechniquesLaajuus (5 cr)
Code: 5031311
Credits
5 op
Objective
After a completed study unit the student
- has a grasp of the relevant machine tools, NC programming and cutting tools, including the parameters and cutting geometry of the cutting tools, and
- is capable of devising a machining plan and of selecting the correct machine tool, the method of securing the tool, and the cutting parameters.
Content
- the basics of metal cutting
- tool geometry
- cutting parameters
- cutting techniques and machine tools
- securing of workpieces
- production systems in machining
- practice assignments
Enrollment
01.12.2024 - 13.01.2025
Timing
13.01.2025 - 31.05.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kupittaa Campus
Teaching languages
- Finnish
Teachers
- Sami Silvennoinen
- Kimmo Metsämäki
Teacher in charge
Kimmo Metsämäki
Groups
-
KMMMODValmistustekniikka
Objective
After a completed study unit the student
- has a grasp of the relevant machine tools, NC programming and cutting tools, including the parameters and cutting geometry of the cutting tools, and
- is capable of devising a machining plan and of selecting the correct machine tool, the method of securing the tool, and the cutting parameters.
Content
- the basics of metal cutting
- tool geometry
- cutting parameters
- cutting techniques and machine tools
- securing of workpieces
- production systems in machining
- practice assignments
Evaluation scale
H-5
Enrollment
01.06.2024 - 02.09.2024
Timing
02.09.2024 - 18.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kupittaa Campus
Teaching languages
- Finnish
Teachers
- Sami Silvennoinen
- Kimmo Metsämäki
Teacher in charge
Kimmo Metsämäki
Scheduling groups
- Pienryhmä A (Size: 16. Open UAS: 0.)
- Pienryhmä B (Size: 16. Open UAS: 0.)
Groups
-
KMMMODValmistustekniikka
Small groups
- 1
- 2
Objective
After a completed study unit the student
- has a grasp of the relevant machine tools, NC programming and cutting tools, including the parameters and cutting geometry of the cutting tools, and
- is capable of devising a machining plan and of selecting the correct machine tool, the method of securing the tool, and the cutting parameters.
Content
- the basics of metal cutting
- tool geometry
- cutting parameters
- cutting techniques and machine tools
- securing of workpieces
- production systems in machining
- practice assignments
Evaluation scale
H-5
Enrollment
01.12.2023 - 08.01.2024
Timing
08.01.2024 - 31.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kupittaa Campus
Teaching languages
- Finnish
Teachers
- Kimmo Metsämäki
Teacher in charge
Kimmo Metsämäki
Groups
-
KMMMODValmistustekniikka
Objective
After a completed study unit the student
- has a grasp of the relevant machine tools, NC programming and cutting tools, including the parameters and cutting geometry of the cutting tools, and
- is capable of devising a machining plan and of selecting the correct machine tool, the method of securing the tool, and the cutting parameters.
Content
- the basics of metal cutting
- tool geometry
- cutting parameters
- cutting techniques and machine tools
- securing of workpieces
- production systems in machining
- practice assignments
Evaluation scale
H-5
Enrollment
01.06.2023 - 04.09.2023
Timing
04.09.2023 - 15.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kupittaa Campus
Teaching languages
- Finnish
Teachers
- Kimmo Metsämäki
Teacher in charge
Kimmo Metsämäki
Groups
-
KMMMODValmistustekniikka
Objective
After a completed study unit the student
- has a grasp of the relevant machine tools, NC programming and cutting tools, including the parameters and cutting geometry of the cutting tools, and
- is capable of devising a machining plan and of selecting the correct machine tool, the method of securing the tool, and the cutting parameters.
Content
- the basics of metal cutting
- tool geometry
- cutting parameters
- cutting techniques and machine tools
- securing of workpieces
- production systems in machining
- practice assignments
Evaluation scale
H-5
Enrollment
01.12.2022 - 08.01.2023
Timing
09.01.2023 - 21.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kupittaa Campus
Teaching languages
- Finnish
Seats
0 - 30
Teachers
- Kimmo Metsämäki
Teacher in charge
Kimmo Metsämäki
Groups
-
KMMMODValmistustekniikka
Objective
After a completed study unit the student
- has a grasp of the relevant machine tools, NC programming and cutting tools, including the parameters and cutting geometry of the cutting tools, and
- is capable of devising a machining plan and of selecting the correct machine tool, the method of securing the tool, and the cutting parameters.
Content
- the basics of metal cutting
- tool geometry
- cutting parameters
- cutting techniques and machine tools
- securing of workpieces
- production systems in machining
- practice assignments
Evaluation scale
H-5
Enrollment
01.06.2022 - 09.09.2022
Timing
05.09.2022 - 16.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kupittaa Campus
Teaching languages
- Finnish
Teachers
- Kimmo Metsämäki
Teacher in charge
Kimmo Metsämäki
Scheduling groups
- Pienryhmä 1 (Size: 0. Open UAS: 0.)
- Pienryhmä 2 (Size: 0. Open UAS: 0.)
Groups
-
KMMMODValmistustekniikka
Small groups
- Pienryhmä 1
- Pienryhmä 2
Objective
After a completed study unit the student
- has a grasp of the relevant machine tools, NC programming and cutting tools, including the parameters and cutting geometry of the cutting tools, and
- is capable of devising a machining plan and of selecting the correct machine tool, the method of securing the tool, and the cutting parameters.
Content
- the basics of metal cutting
- tool geometry
- cutting parameters
- cutting techniques and machine tools
- securing of workpieces
- production systems in machining
- practice assignments
Evaluation scale
H-5
Enrollment
04.12.2021 - 09.01.2022
Timing
10.01.2022 - 29.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kupittaa Campus
Teaching languages
- Finnish
Teachers
- Merja Peltokoski
- Kimmo Metsämäki
- Joonas Pekkarinen
Teacher in charge
Joonas Pekkarinen
Scheduling groups
- Pienryhmä 1 (Size: 16. Open UAS: 0.)
- Pienryhmä 2 (Size: 16. Open UAS: 0.)
Groups
-
KMMMODValmistustekniikka
Small groups
- Pienryhmä 1
- Pienryhmä 2
Objective
After a completed study unit the student
- has a grasp of the relevant machine tools, NC programming and cutting tools, including the parameters and cutting geometry of the cutting tools, and
- is capable of devising a machining plan and of selecting the correct machine tool, the method of securing the tool, and the cutting parameters.
Content
- the basics of metal cutting
- tool geometry
- cutting parameters
- cutting techniques and machine tools
- securing of workpieces
- production systems in machining
- practice assignments
Evaluation scale
H-5