Siirry suoraan sisältöön

Enterprise Networking, Security and AutomationLaajuus (5 op)

Tunnus: TE00BU43

Laajuus

5 op

Osaamistavoitteet

By the end of this course, students will be able:

· Configure single-area OSPFv2 in both point-to-point and multiaccess networks.
· Explain how to mitigate threats and enhance network security using access control lists and security best practices.
· Implement standard IPv4 ACLs to filter traffic and secure administrative access.
· Configure NAT services on the edge router to provide IPv4 address scalability.
· Explain techniques to provide address scalability and secure remote access for WANs.
· Explain how to optimize, monitor, and troubleshoot scalable network architectures.
· Explain how networking devices implement QoS.
· Implement protocols to manage the network.
· Explain how technologies such as virtualization, software defined networking, and automation affect evolving networks.

Sisältö

Enterprise Networking, Security, and Automation (ENSA) describes the architecture, components, operations, and security to scale for large, complex networks, including wide area network (WAN) technologies. The course emphasizes network security concepts and introduces network virtualization and automation. Students learn how to configure, troubleshoot, and secure enterprise network devices and understand how application programming interfaces (API) and configuration management tools enable network automation. The course includes activities using Packet Tracer, hands-on lab work, and a wide array of assessment types and tools.

Esitietovaatimukset

Opintojaksot Internet Networks and Security (5051215) ja Introduction to Networks (TE00BU42) tai vastaava osaaminen.

Ilmoittautumisaika

01.12.2024 - 07.03.2025

Ajoitus

03.03.2025 - 25.04.2025

Opintopistemäärä

5 op

Toteutustapa

Lähiopetus

Yksikkö

Tekniikka ja liiketoiminta

Toimipiste

Kupittaan kampus

Opetuskielet
  • Englanti
Paikat

10 - 65

Koulutus
  • Tieto- ja viestintätekniikan koulutus
  • Tietojenkäsittelyn koulutus
  • Degree Programme in Information and Communications Technology
Opettaja
  • Tero Virtanen
  • Marko Teräspuro
Vastuuopettaja

Tero Virtanen

Ryhmät
  • ICTMODictprojSem
    MOD ICT Projects & Cybersecurity (International Semester)
  • PTIVIS23T
    Data Networks and Cybersecurity
  • PTIETS23dncs
    Data Networks and Cybersecurity

Tavoitteet

By the end of this course, students will be able:

· Configure single-area OSPFv2 in both point-to-point and multiaccess networks.
· Explain how to mitigate threats and enhance network security using access control lists and security best practices.
· Implement standard IPv4 ACLs to filter traffic and secure administrative access.
· Configure NAT services on the edge router to provide IPv4 address scalability.
· Explain techniques to provide address scalability and secure remote access for WANs.
· Explain how to optimize, monitor, and troubleshoot scalable network architectures.
· Explain how networking devices implement QoS.
· Implement protocols to manage the network.
· Explain how technologies such as virtualization, software defined networking, and automation affect evolving networks.

Sisältö

Enterprise Networking, Security, and Automation (ENSA) describes the architecture, components, operations, and security to scale for large, complex networks, including wide area network (WAN) technologies. The course emphasizes network security concepts and introduces network virtualization and automation. Students learn how to configure, troubleshoot, and secure enterprise network devices and understand how application programming interfaces (API) and configuration management tools enable network automation. The course includes activities using Packet Tracer, hands-on lab work, and a wide array of assessment types and tools.

Oppimateriaalit

All needed material will be available online in https://www.netacad.com
Further course enrollment instructions are provided by instructor.
Please register to the site using school email.

Tenttien ajankohdat ja uusintamahdollisuudet

Theory final exam and Packet Tracer exam will held in course.
You can do one re-exam within course deadline.
NOTE: Course ending time shown in academy system is not real, please check the course plan for end date!

Opiskelijan ajankäyttö ja kuormitus

Lecturing and laboratory work each week
Independent studying, including:

- Studying the course material
- Completing exercises
- Preparation for finals exam(s)

Sisällön jaksotus

Course describes the architecture, components, operations, and security to scale for large, complex networks, including wide area network (WAN) technologies. The course emphasizes network security concepts and introduces network virtualization and automation. Students learn how to configure, troubleshoot, and secure enterprise network devices and understand how application programming interfaces (API) and configuration management tools enable network automation.

By the end of this course, students will be able:

- Configure single-area OSPFv2 in both point-to-point and multiaccess networks.
- Explain how to mitigate threats and enhance network security using access control lists and security best practices.
- Implement standard IPv4 ACLs to filter traffic and secure administrative access.
- Configure NAT services on the edge router to provide IPv4 address scalability.
- Explain techniques to provide address scalability and secure remote access for WANs.
- Explain how to optimize, monitor, and troubleshoot scalable network architectures.
- Explain how networking devices implement QoS.
- Implement protocols to manage the network.
- Explain how technologies such as virtualization, software defined networking, and automation affect evolving networks.

Arviointiasteikko

H-5

Arviointimenetelmät ja arvioinnin perusteet

Laboratory assignments in laboratory room
Packet tracer assignments done at home
Module exams
Practice final exams
Theory final exam and Packet Tracer final exam.

The overall result is the sum of the all results of the assignments and exams, passing limit is 60%.
Detailed grading limits will be provided in course plan when course starts but past grading limits have been the following:

Less than 60% Fail
60-67.4% Grade 1
68-75.4% Grade 2
76-83.4% Grade 3
84-91.4% Grade 4
91.5% or higher Grade 5

Esitietovaatimukset

Opintojaksot Internet Networks and Security (5051215) ja Introduction to Networks (TE00BU42) tai vastaava osaaminen.

Ilmoittautumisaika

01.09.2023 - 01.03.2024

Ajoitus

04.03.2024 - 30.04.2024

Opintopistemäärä

5 op

Toteutustapa

Lähiopetus

Yksikkö

Tekniikka ja liiketoiminta

Toimipiste

Kupittaan kampus

Opetuskielet
  • Englanti
Paikat

0 - 60

Koulutus
  • Tieto- ja viestintätekniikan koulutus
  • Tietojenkäsittelyn koulutus
  • Degree Programme in Information and Communications Technology
Opettaja
  • Tero Virtanen
  • Marko Teräspuro
Vastuuopettaja

Tero Virtanen

Ryhmät
  • PTIETS22dncs
    PTIETS22 Tietoverkot ja Kyberturva
  • PTIVIS22T
    Data Networks and Cybersecurity

Tavoitteet

By the end of this course, students will be able:

· Configure single-area OSPFv2 in both point-to-point and multiaccess networks.
· Explain how to mitigate threats and enhance network security using access control lists and security best practices.
· Implement standard IPv4 ACLs to filter traffic and secure administrative access.
· Configure NAT services on the edge router to provide IPv4 address scalability.
· Explain techniques to provide address scalability and secure remote access for WANs.
· Explain how to optimize, monitor, and troubleshoot scalable network architectures.
· Explain how networking devices implement QoS.
· Implement protocols to manage the network.
· Explain how technologies such as virtualization, software defined networking, and automation affect evolving networks.

Sisältö

Enterprise Networking, Security, and Automation (ENSA) describes the architecture, components, operations, and security to scale for large, complex networks, including wide area network (WAN) technologies. The course emphasizes network security concepts and introduces network virtualization and automation. Students learn how to configure, troubleshoot, and secure enterprise network devices and understand how application programming interfaces (API) and configuration management tools enable network automation. The course includes activities using Packet Tracer, hands-on lab work, and a wide array of assessment types and tools.

Oppimateriaalit

All needed material will be available online in https://cisco.netacad.com
Further course enrollment instructions are provided by instructor.
Please register to the site using school email.

Tenttien ajankohdat ja uusintamahdollisuudet

Theory final exam and Packet Tracer exam will held in course.
You can do one re-exam within course deadline.
NOTE: Course ending time shown in academy system is not real, please check the course plan for end date!

Opiskelijan ajankäyttö ja kuormitus

Lecturing and laboratory work each week
Independent studying, including:

- Studying the course material
- Completing exercises
- Preparation for finals exam(s)

Sisällön jaksotus

Course describes the architecture, components, operations, and security to scale for large, complex networks, including wide area network (WAN) technologies. The course emphasizes network security concepts and introduces network virtualization and automation. Students learn how to configure, troubleshoot, and secure enterprise network devices and understand how application programming interfaces (API) and configuration management tools enable network automation.

By the end of this course, students will be able:

- Configure single-area OSPFv2 in both point-to-point and multiaccess networks.
- Explain how to mitigate threats and enhance network security using access control lists and security best practices.
- Implement standard IPv4 ACLs to filter traffic and secure administrative access.
- Configure NAT services on the edge router to provide IPv4 address scalability.
- Explain techniques to provide address scalability and secure remote access for WANs.
- Explain how to optimize, monitor, and troubleshoot scalable network architectures.
- Explain how networking devices implement QoS.
- Implement protocols to manage the network.
- Explain how technologies such as virtualization, software defined networking, and automation affect evolving networks.

Arviointiasteikko

H-5

Arviointimenetelmät ja arvioinnin perusteet

Laboratory assignments in laboratory room
Packet tracer assignments done at home
Module exams
Practice final exams
Theory final exam and Packet Tracer final exam.

The overall result is the sum of the all results of the assignments and exams, passing limit is 60%.
Detailed grading limits will be provided in course plan when course starts but past grading limits have been the following:

Less than 60% Fail
60-67.4% Grade 1
68-75.4% Grade 2
76-83.4% Grade 3
84-91.4% Grade 4
91.5% or higher Grade 5

Esitietovaatimukset

Opintojaksot Internet Networks and Security (5051215) ja Introduction to Networks (TE00BU42) tai vastaava osaaminen.

Ilmoittautumisaika

28.11.2022 - 13.01.2023

Ajoitus

27.02.2023 - 30.04.2023

Opintopistemäärä

5 op

Toteutustapa

Lähiopetus

Yksikkö

Tekniikka ja liiketoiminta

Toimipiste

Kupittaan kampus

Opetuskielet
  • Englanti
Paikat

0 - 60

Koulutus
  • Tieto- ja viestintätekniikan koulutus
  • Degree Programme in Information and Communications Technology
Opettaja
  • Tero Virtanen
  • Marko Teräspuro
Vastuuopettaja

Tero Virtanen

Ajoitusryhmät
  • R1 (Koko: 30. Avoin AMK: 0.)
  • R2 (Koko: 30. Avoin AMK: 0.)
  • R3 (Koko: 30. Avoin AMK: 0.)
Ryhmät
  • PTIVIS21T
    Data Networks and Cybersecurity
  • PTIETS21dncs
    PTIETS21 Tietoverkot ja Kyberturva
Pienryhmät
  • R1
  • R2
  • R3

Tavoitteet

By the end of this course, students will be able:

· Configure single-area OSPFv2 in both point-to-point and multiaccess networks.
· Explain how to mitigate threats and enhance network security using access control lists and security best practices.
· Implement standard IPv4 ACLs to filter traffic and secure administrative access.
· Configure NAT services on the edge router to provide IPv4 address scalability.
· Explain techniques to provide address scalability and secure remote access for WANs.
· Explain how to optimize, monitor, and troubleshoot scalable network architectures.
· Explain how networking devices implement QoS.
· Implement protocols to manage the network.
· Explain how technologies such as virtualization, software defined networking, and automation affect evolving networks.

Sisältö

Enterprise Networking, Security, and Automation (ENSA) describes the architecture, components, operations, and security to scale for large, complex networks, including wide area network (WAN) technologies. The course emphasizes network security concepts and introduces network virtualization and automation. Students learn how to configure, troubleshoot, and secure enterprise network devices and understand how application programming interfaces (API) and configuration management tools enable network automation. The course includes activities using Packet Tracer, hands-on lab work, and a wide array of assessment types and tools.

Arviointiasteikko

H-5

Esitietovaatimukset

Opintojaksot Internet Networks and Security (5051215) ja Introduction to Networks (TE00BU42) tai vastaava osaaminen.

Ilmoittautumisaika

02.12.2021 - 21.01.2022

Ajoitus

28.02.2022 - 30.04.2022

Opintopistemäärä

5 op

Toteutustapa

Lähiopetus

Yksikkö

Tekniikka ja liiketoiminta

Toimipiste

Kupittaan kampus

Opetuskielet
  • Suomi
  • Englanti
Paikat

0 - 70

Koulutus
  • Tieto- ja viestintätekniikan koulutus
  • Degree Programme in Information and Communications Technology
Opettaja
  • Tero Virtanen
Vastuuopettaja

Tero Virtanen

Ajoitusryhmät
  • R1 (Koko: 33. Avoin AMK: 0.)
  • R2 (Koko: 33. Avoin AMK: 0.)
Ryhmät
  • PTIVIS20T
    Data Networks and Cybersecurity
Pienryhmät
  • R1
  • R2

Tavoitteet

By the end of this course, students will be able:

· Configure single-area OSPFv2 in both point-to-point and multiaccess networks.
· Explain how to mitigate threats and enhance network security using access control lists and security best practices.
· Implement standard IPv4 ACLs to filter traffic and secure administrative access.
· Configure NAT services on the edge router to provide IPv4 address scalability.
· Explain techniques to provide address scalability and secure remote access for WANs.
· Explain how to optimize, monitor, and troubleshoot scalable network architectures.
· Explain how networking devices implement QoS.
· Implement protocols to manage the network.
· Explain how technologies such as virtualization, software defined networking, and automation affect evolving networks.

Sisältö

Enterprise Networking, Security, and Automation (ENSA) describes the architecture, components, operations, and security to scale for large, complex networks, including wide area network (WAN) technologies. The course emphasizes network security concepts and introduces network virtualization and automation. Students learn how to configure, troubleshoot, and secure enterprise network devices and understand how application programming interfaces (API) and configuration management tools enable network automation. The course includes activities using Packet Tracer, hands-on lab work, and a wide array of assessment types and tools.

Arviointiasteikko

H-5

Esitietovaatimukset

Opintojaksot Internet Networks and Security (5051215) ja Introduction to Networks (TE00BU42) tai vastaava osaaminen.