Jaakko Lamminpää, Mikko Peltonen de Santiago
Material available for this course in Itslearning including slides and example calculations as well as links to online material.
In independent study you can use any electronics book for engineers (introductory level) and any available online material.
Lectures, preliminary assignments and calculations, laboratory work.
Course consists of two parts:
- Introduction to circuits and measurement techniques (weight 60 %)
- Introduction to electronics (transistors, opamps and logic gates) (weight 40 %)
Both parts need to be completed with a passing grade.
Missing work receives a grade of -3.
Only tasks returned on time will be evaluated.
Redoing failed or missing parts must be agreed with the teacher separately. Laboratory work or reports with passing grade cannot be retaken.
English
09.01.2023 - 30.04.2023
30.11.2022 - 18.01.2023
0 - 100
Engineering and Business
Degree Programme in Information and Communication Technology, Degree Programme in Information and Communications Technology
Kupittaa Campus
H-5
None.
The emphasis is on the laboratory reports and course cannot be passed by taking only the test.
The test is held during a laboratory session and the date is in ITSlearning.
One laboratory session at the end of the course is for completing a missing lab work or redoing a failed assignment.
Grade for a passed lab work cannot be raised.
Flipped learning, hands on working, combining theory and practice during lab work.
Lectures: 7x 2 h = 14 h
Lab. sessions: 13x 3 h = 39 h
Independent study: 26 h
Preliminary assignments: 26 h
Finishing reports: 20 h
Course includes building simple circuits on a protoboard and basic measurements.
Main topics are: DC circuits and connections, AC circuits and basic components, semiconductors in a simple circuit, and using equipment to measure these circuits.
Course is held in Spring 2023.
More accurate description and timetable is found on ITSlearning.
Does not meet the requirements for the grade 1.
Student
- can build a simple circuit by connecting components to the protoboard.
- can measure the resistance, voltage and current from different branches of the circuit.
- knows the basic laws of electronics
- All assignments are returned, even if the reports are lacking.
Student
- can apply Kirchoff's laws to analyze the circuit
- knows and understands the concept of power
- preliminary calculations and measurements are mostly correct
- reports are done with care and include the relevant information
Student
- has grasped the fundamentals of electric circuits
- can choose the correct components for different situations
- can analyze the circuit and understands how it functions
- can evaluate the results critically
- reports are precise, stylish and show analysis of the circuit
01.01.1970 - 01.01.1970
Ville Huhtinen, Jussi Hurri
ITS Learning -järjestelmässä jaettavasta materiaalista
Omista luentomuistiinpanoista.
Lisämateriaalina voi halutessaan käyttää kirjaa Boylestad: Introductory Circuit analysis soveltuvin osin. (not translated)
Oppitunnit, laskuharjoitukset ja laboratorioharjoitukset (not translated)
Opintojaksoon kuuluu kaksi osaa
- Piiri- ja mittaustekniikka (painoarvo 60 %)
- Elektroniikka (painoarvo 40 %)
Molemmat osat pitää olla hyväksytysti suoritetut hyväksytyn arvosanan saamiseksi. Kummankin osan arvosana (raporttien ja mahdollisen laboratoriotestin keskiarvo) pitää olla vähintään 1,0
Osien sisällä puuttuvan suorituksen arvosanaksi tulee -3.
Vain ajallaan palautetuista tehtävistä voi saada täydet pisteet.
Hylätyn osan ja sen sisällä olevien osasuorituksien uusiminen tapahtuu opettajan kanssa erikseen sopimalla. Hyväksyttyjen arvosanoja tai hyväksyttyjä osasuorituksien arvosanoja ei voi korottaa. (not translated)
Finnish
09.01.2023 - 30.04.2023
01.12.2022 - 18.01.2023
60 - 105
Engineering and Business
Degree Programme in Information and Communication Technology
Kupittaa Campus
H-5
Ei ole. (not translated)
Opintojakson osuuden suorittamisessa keskeisessä roolissa ovat laboratorioharjoitukset ja laboratoriotesti. Hylätyn suorituksen uusiminen on mahdollista vasta ensi lukuvuonna seuraavan toteutuksen yhteydessä. Arviointi perustuu laboratoriotöihin, joten hyväksyttyä suoritusta ei voi korottaa. (not translated)
Piiri- ja mittaustekniikka
4 * 3 h luento
8 * 3 h laboratorioharjoitus
2 h laboratoriotesti
3 h rästikerta tarvittaessa
Alkutehtävät ja muu opiskelu omalla ajalla 43 h
Elektroniikka:
2 h luento
4 * 3h laboratorioharjoitus + yksi 3h laboratorioharjoituksen varakerta + raportointi (not translated)
Tarkempi sisältökuvaus ja ajoitus on Itslearning:issä, tunnit pidetään lukujärjestyksen mukaan. (not translated)
Raporttien ja testin perusteella laskettu arvosana ei riitä tyydyttävään arvosanaan 1. (not translated)
Osaa kytkeä komponentteja kytkentäalustalle ja osaa mitata jännitettä, virtaa ja resistanssia. Tuntee sähkötekniikan peruslait ja suureet. Kaikki viikkotehtävät on tehty ja palautettu. (not translated)
Osaa soveltaa Ohmin ja Kirchhoffin lakeja virtapiirien ratkaisuun. Tuntee teho-käsitteen. Viikkotehtävien laskelmat ja mittaukset ovat pääsääntöisesti oikein ja raportit sisältävät oleelliset asiat. Raportit on palautettu ajallaan. (not translated)
Osaa valita kytkennän komponentit tehonkeston ym. perusteella ja arvioida saamiensa tuloksien oikeellisuutta. Mittaukset ja laskelmat ovat oikein. Raportit ovat ulkoasultaan siistejä. Raportit on palautettu ajallaan. (not translated)