Strength of Materials (2 cr)
Code: 5011104-3008
General information
- Enrollment
- 14.12.2024 - 12.01.2025
- Registration for the implementation has ended.
- Timing
- 13.01.2025 - 22.05.2025
- Implementation has ended.
- Number of ECTS credits allocated
- 2 cr
- Local portion
- 2 cr
- Mode of delivery
- Contact learning
- Unit
- Engineering and Business
- Campus
- Kupittaa Campus
- Teaching languages
- Finnish
- Seats
- 0 - 60
- Degree programmes
- Degree Programme in Automotive and Transportation Engineering
Realization has 11 reservations. Total duration of reservations is 22 h 0 min.
| Time | Topic | Location |
|---|---|---|
|
Tue 14.01.2025 time 12:00 - 14:00 (2 h 0 min) |
Lujuusopin perusteet 5011104-3008 |
EDU_3006_3007
Oppimistila avo muunto byod
|
|
Tue 21.01.2025 time 12:00 - 14:00 (2 h 0 min) |
Lujuusopin perusteet 5011104-3008 |
EDU_3006_3007
Oppimistila avo muunto byod
|
|
Tue 28.01.2025 time 12:00 - 14:00 (2 h 0 min) |
Lujuusopin perusteet 5011104-3008 |
EDU_3006_3007
Oppimistila avo muunto byod
|
|
Tue 04.02.2025 time 12:00 - 14:00 (2 h 0 min) |
Lujuusopin perusteet 5011104-3008 |
EDU_3006_3007
Oppimistila avo muunto byod
|
|
Tue 11.02.2025 time 12:00 - 14:00 (2 h 0 min) |
Lujuusopin perusteet 5011104-3008 |
EDU_3006_3007
Oppimistila avo muunto byod
|
|
Tue 25.02.2025 time 12:00 - 14:00 (2 h 0 min) |
Lujuusopin perusteet 5011104-3008 |
EDU_3006_3007
Oppimistila avo muunto byod
|
|
Tue 04.03.2025 time 12:00 - 14:00 (2 h 0 min) |
Lujuusopin perusteet 5011104-3008 |
EDU_3006_3007
Oppimistila avo muunto byod
|
|
Tue 11.03.2025 time 12:00 - 14:00 (2 h 0 min) |
Lujuusopin perusteet 5011104-3008 |
EDU_3006_3007
Oppimistila avo muunto byod
|
|
Tue 18.03.2025 time 12:00 - 14:00 (2 h 0 min) |
Lujuusopin perusteet 5011104-3008 |
ICT_B1047_Alpha
ALPHA
|
|
Tue 25.03.2025 time 12:00 - 14:00 (2 h 0 min) |
Lujuusopin perusteet 5011104-3008 |
EDU_3006_3007
Oppimistila avo muunto byod
|
|
Tue 15.04.2025 time 12:00 - 14:00 (2 h 0 min) |
Lujuusopin perusteet 5011104-3008 |
LEM_A191
Suunnittelutila
|
Evaluation scale
H-5
Content scheduling
VKO 3: Kurssin esittely, suoran sauvan veto tai puristus, kuormituksen laatu, lujuusopillisen suunnitteluprosessin vaiheet
VKO 4: Jännityksen ja venymän välinen yhteys, kimmokerroin, myötöraja, suunnittelussa huomioitavia asioita
VKO 5: Lämpölaajeneminen, jousivakio ja tärkeimmät rakennemateriaalit
VKO 6: Leikkaus- ja vääntöjännitykset, akselin vääntö
VKO 7: Palkin taivutus
VKO 9: Palkin taivutus jatkuu
VKO 10: Pilarin nurjahdus
VKO 11: Yhdistetty veto/puristus ja taivutusjännitys
VKO 12: Tentti
VKO 13: Tentin palautus
Objective
After completing the course, the student knows methods how to analyze the strength of certain relatively simple structures.
Content
Bars in compression or in tension, rivets or screws in pure shear and beams in bending. In the case of bars and in some shearing conditions, both stresses and deformations are considered. However, in the case of beams, only stresses are considered and the computation of deformations or deflections are left to the following course Advanced Strength of Materials.
Materials
Course slides and freely selected book in terms of principles of strength
Teaching methods
Learning by doing
Exam schedules
18.3.
15.4.
10.6.
Pedagogic approaches and sustainable development
New skills based on earlier knowledge (brick-wall pedagogy).
Development of strong structures.
Completion alternatives
No optional course execution
Student workload
2 credits = 54 working hours = 5,4 hours per week
Evaluation methods and criteria
Evaluation: Exam 100 %, based on homework 20 % extra points are available
Evaluation during the course
Mathematical method
Failed (0)
Points < 35 %
Assessment criteria, satisfactory (1-2)
1) 35 % < points < 48 %
2) 48 % < points < 61 %
Assessment criteria, good (3-4)
3) 61 % < points < 74 %
4) 74 % < points < 87 %
Assessment criteria, excellent (5)
87 % < points
Further information
jari.lahtinen@turkuamk.fi