Skip to main content

R&D ProjectLaajuus (10 cr)

Code: 5051268

Credits

10 op

Objective

After completing the course, the student will be able to:
- Network with various R&D project stakeholders
- Collect valuable information from networking activity for R&D project preparation
- Match the most appropriate R&D funding mechanisms to R&D projects
- Prepare a funding application, including budget, objectives, tasks etc.
- Work as part of a TUAS initiated R&D project
- Independently utilize CDIO principles in an R&D context
- Apply suitable research methods for a given R&D project
- Analyze, report and present research results to an international audience

Content

First half of the course
- Negotiations with potential customers and other important stakeholders
- Information needed for R&D project preparations
- Suitable funding instruments for R&D projects
- Preparation of funding application
- Second half of the course
Participation in an existing TUAS R&D project as a programmer, technical artist or assistant project manager
- Executing CDIO principles in an R&D context
- Utilizing research methods for selected artefacts
- Analyzing research results
- Reporting research results in a suitable format (such as demo, poster, conference paper or journal article)
- Presenting results in an international environment such as Nordic Games

Enrollment

01.06.2024 - 13.09.2024

Timing

02.09.2024 - 18.12.2024

Number of ECTS credits allocated

10 op

Mode of delivery

Contact teaching

Unit

Engineering and Business

Campus

Kupittaa Campus

Teaching languages
  • Finnish
  • English
Degree programmes
  • Degree Programme in Information and Communication Technology
  • Degree Programme in Information and Communications Technology
Teachers
  • Werner Ravyse
Groups
  • PTIVIS21P
    Game and Interactive Technologies

Objective

After completing the course, the student will be able to:
- Network with various R&D project stakeholders
- Collect valuable information from networking activity for R&D project preparation
- Match the most appropriate R&D funding mechanisms to R&D projects
- Prepare a funding application, including budget, objectives, tasks etc.
- Work as part of a TUAS initiated R&D project
- Independently utilize CDIO principles in an R&D context
- Apply suitable research methods for a given R&D project
- Analyze, report and present research results to an international audience

Content

First half of the course
- Negotiations with potential customers and other important stakeholders
- Information needed for R&D project preparations
- Suitable funding instruments for R&D projects
- Preparation of funding application
- Second half of the course
Participation in an existing TUAS R&D project as a programmer, technical artist or assistant project manager
- Executing CDIO principles in an R&D context
- Utilizing research methods for selected artefacts
- Analyzing research results
- Reporting research results in a suitable format (such as demo, poster, conference paper or journal article)
- Presenting results in an international environment such as Nordic Games

Materials

Due to the practical nature of this course, there is no prescribed learning material. All necessary documentation and other material toward the successful completion of Advanced Game Technologies will be shared with students throughout the course.

The teacher will share the necessary resources for the academic writing component of the course at the correct timing.

Teaching methods

The R&D Project course is taught by means of:
1. Contact sessions and lectures;
2. Lecturer and TGL engineer guidance during on-site project work;
- This includes code reviews for programmers and asset evaluations for content producers
3. Customer coaching during on-site project work
4. Self-learning and discovery by students

This course is entirely hands-on and students are expected to take initiative for their learning.

Exam schedules

This course has no formal examination

International connections

This course leans on CDIO principles and takes a project-based learning approach.

Student workload

Each student of the R&D Project course are each expected to complete 270 hours of work:
Below is a rough indication of the hours for different work categories - these are purely an indicator and are expected to be different for each group and can change according to group needs:
1. Contact sessions and lectures (35-45 hours)
2. Coaching during on-site work (40-60 hours)
3. Independent work (130-180 hours)
Students are expected to keep individual work logs of their activities related to the various projects. These work logs form part of the course assessment and will be reviewed regularly throughout the course.

Content scheduling

This course runs from September to December and sees students integrated into one or more of the Futuristic Interactive Technologies research group RDI projects.
- The project(s) will be introduced during the opening two weeks of the course;
- In the next weeks, student groups are expected to research (under supervision) the problem and present a feasible solution;
- After the proposed solutions have been approved, student groups will draw up a project management plan that will see them through to the end of the course;
- The project plan must include development, implementation and scientific testing of the solution.

- Each group is to produce a draft academic publication based on the work they have researched and completed.

Further information

Students are also responsible for:
1. Distributing and collecting customer and expert feedback forms for their project evaluations.
2. Filling and returning peer- and self-evaluation forms at the end of the project.

Failure to produce these documents will impact the course grade.
The lecturers will provide the appropriate forms at the time they are required.

Evaluation scale

H-5

Assessment methods and criteria

The project is evaluated as follows:
GROUP grade...
- Expert evaluation of the development deliverable (H-5);
- Customer evaluation of the development deliverable (H-5);
- Lecturer overall impression of the academic writing and development deliverables (H-5);
The average of these three gives a group grade for each student per project.

INDIVIDUAL student per group grade
Each student will also be measured on their contribution to the group's activities by:
- Self assessment of the contribution made;
- Group member evaluation of the contribution made;
- An overall impression by the course lecturers of the individual work logs and academic writing efforts.
The average of these three gives an individual grade for each student per project.

A detailed breakdown of the assessment criteria will be given during the course introduction.

Enrollment

02.08.2023 - 15.09.2023

Timing

04.09.2023 - 22.12.2023

Number of ECTS credits allocated

10 op

Mode of delivery

Contact teaching

Unit

Engineering and Business

Campus

Kupittaa Campus

Teaching languages
  • Finnish
  • English
Degree programmes
  • Degree Programme in Information and Communication Technology
  • Degree Programme in Information and Communications Technology
Teachers
  • Mika Luimula
  • Werner Ravyse
Teacher in charge

Werner Ravyse

Groups
  • PTIVIS20P
    Game and Interactive Technologies

Objective

After completing the course, the student will be able to:
- Network with various R&D project stakeholders
- Collect valuable information from networking activity for R&D project preparation
- Match the most appropriate R&D funding mechanisms to R&D projects
- Prepare a funding application, including budget, objectives, tasks etc.
- Work as part of a TUAS initiated R&D project
- Independently utilize CDIO principles in an R&D context
- Apply suitable research methods for a given R&D project
- Analyze, report and present research results to an international audience

Content

First half of the course
- Negotiations with potential customers and other important stakeholders
- Information needed for R&D project preparations
- Suitable funding instruments for R&D projects
- Preparation of funding application
- Second half of the course
Participation in an existing TUAS R&D project as a programmer, technical artist or assistant project manager
- Executing CDIO principles in an R&D context
- Utilizing research methods for selected artefacts
- Analyzing research results
- Reporting research results in a suitable format (such as demo, poster, conference paper or journal article)
- Presenting results in an international environment such as Nordic Games

Materials

Due to the practical nature of this course, there is no prescribed learning material. All necessary documentation and other material toward the successful completion of Advanced Game Technologies will be shared with students throughout the course.

The teacher will share the necessary resources for the academic writing component of the course at the correct timing.

Teaching methods

The R&D Project course is taught by means of:
1. Contact sessions and lectures;
2. Lecturer and TGL engineer guidance during on-site project work;
- This includes code reviews for programmers and asset evaluations for content producers
3. Customer coaching during on-site project work
4. Self-learning and discovery by students

This course is entirely hands-on and students are expected to take initiative for their learning.

Location and timing of the contact and practical sessions will be made available in August 2023.

Exam schedules

This course has no formal examination

International connections

This course leans on CDIO principles and takes a project-based learning approach.

Student workload

Each student of the R&D Project course are each expected to complete 270 hours of work:
Below is a rough indication of the hours for different work categories - these are purely an indicator and are expected to be different for each group and can change according to group needs:
1. Contact sessions and lectures (35-45 hours)
2. Coaching during on-site work (40-60 hours)
3. Independent work (130-180 hours)
Students are expected to keep individual work logs of their activities related to the various projects. These work logs form part of the course assessment and will be reviewed regularly throughout the course.

Content scheduling

This course runs from September to December and sees students integrated into one or more of the Futuristic Interactive Technologies research group RDI projects.
- The project(s) will be introduced during the opening two weeks of the course;
- In the next weeks, student groups are expected to research (under supervision) the problem and present a feasible solution;
- After the proposed solutions have been approved, student groups will draw up a project management plan that will see them through to the end of the course;
- The project plan must include development, implementation and scientific testing of the solution.

- Each group is to produce a draft academic publication based on the work they have researched and completed.

Further information

Students are also responsible for:
1. Distributing and collecting customer and expert feedback forms for their project evaluations.
2. Filling and returning peer- and self-evaluation forms at the end of the project.

Failure to produce these documents will impact the course grade.
The lecturers will provide the appropriate forms at the time they are required.

Evaluation scale

H-5

Assessment methods and criteria

The project is evaluated as follows:
GROUP grade...
- Expert evaluation of the development deliverable (H-5);
- Customer evaluation of the development deliverable (H-5);
- Lecturer overall impression of the academic writing and development deliverables (H-5);
The average of these three gives a group grade for each student per project.

INDIVIDUAL student per group grade
Each student will also be measured on their contribution to the group's activities by:
- Self assessment of the contribution made;
- Group member evaluation of the contribution made;
- An overall impression by the course lecturers of the individual work logs and academic writing efforts.
The average of these three gives an individual grade for each student per project.

A detailed breakdown of the assessment criteria will be given during the course introduction.

Enrollment

30.07.2022 - 09.09.2022

Timing

29.08.2022 - 22.12.2022

Number of ECTS credits allocated

10 op

Mode of delivery

Contact teaching

Unit

Engineering and Business

Campus

Kupittaa Campus

Teaching languages
  • Finnish
  • English
Degree programmes
  • Degree Programme in Information and Communication Technology
  • Degree Programme in Information and Communications Technology
Teachers
  • Mika Luimula
  • Werner Ravyse
Teacher in charge

Werner Ravyse

Groups
  • PTIVIS19P
    Game and Interactive Technologies

Objective

After completing the course, the student will be able to:
- Network with various R&D project stakeholders
- Collect valuable information from networking activity for R&D project preparation
- Match the most appropriate R&D funding mechanisms to R&D projects
- Prepare a funding application, including budget, objectives, tasks etc.
- Work as part of a TUAS initiated R&D project
- Independently utilize CDIO principles in an R&D context
- Apply suitable research methods for a given R&D project
- Analyze, report and present research results to an international audience

Content

First half of the course
- Negotiations with potential customers and other important stakeholders
- Information needed for R&D project preparations
- Suitable funding instruments for R&D projects
- Preparation of funding application
- Second half of the course
Participation in an existing TUAS R&D project as a programmer, technical artist or assistant project manager
- Executing CDIO principles in an R&D context
- Utilizing research methods for selected artefacts
- Analyzing research results
- Reporting research results in a suitable format (such as demo, poster, conference paper or journal article)
- Presenting results in an international environment such as Nordic Games

Materials

Due to the practical nature of this course, there is no prescribed learning material. All necessary documentation and other material toward the successful completion of Advanced Game Technologies will be shared with students throughout the course.

Teaching methods

The R&D Project course is taught by means of:
1. Contact sessions and lectures;
2. Lecturer and TGL engineer guidance during on-site project work;
- This includes code reviews for programmers and asset evaluations for content producers
3. Customer coaching during on-site project work
4. Self-learning and discovery by students

This course is entirely hands-on and students are expected to take initiative for their learning.

Exam schedules

This course has no formal examination

International connections

This course leans on CDIO principles and takes a project-based learning approach.

Completion alternatives

If the COVID19 situation demands it, we will react toward a more online-driven approach.

Student workload

Each student of the R&D Project course are each expected to complete 270 hours of work:
Below is a rough indication of the hours for different work categories - these are purely an indicator and are expected to be different for each group and can change according to group needs:
1. Contact sessions and lectures (35-45 hours)
2. Coaching during on-site work (60-100 hours)
3. Independent work (100-140 hours)
Students are expected to keep individual work logs of their activities related to the various projects. These work logs form part of the course assessment and will be reviewed regularly throughout the course.

Content scheduling

This course runs from September to December and sees students integrated into one or more of the Futuristic Interactive Technologies research group RDI projects.
- The project(s) will be introduced during the opening two weeks of the course;
- In the next weeks, student groups are expected to research (under supervision) the problem and present a feasible solution;
- After the proposed solutions have been approved, student groups will draw up a project management plan that will see them through to the end of the course;
- The project plan must include development, implementation and scientific testing of the solution;
- The tangibles for the course are a working solution and comprehensive test report.

Further information

Students are responsible for:
1. Distributing and collecting customer and expert feedback forms for their project evaluations.
2. Filling and returning peer- and self-evaluation forms at the end of the project.
Failure to produce these documents will impact the course grade.
The lecturers will provide the appropriate forms at the time they are required.

Evaluation scale

H-5

Assessment methods and criteria

The project is evaluated as follows:
GROUP grade...
- Expert evaluation of the deliverable (H-5);
- Customer evaluation of the deliverable (H-5);
- Lecturer overall impression of the deliverable (H-5).
The average of these three gives a group grade for each student per project.

INDIVIDUAL student per group grade
Each student will also be measured on their contribution to the group's activities by:
- Self assessment of the contribution made;
- Group member evaluation of the contribution made;
- An overall impression by the course lecturers of the individual work logs.
The average of these three gives an individual grade for each student per project.

The course grade will be calculated:
(GROUP grade x 0,3) + (INDIVIDUAL grade x 0,7)

Enrollment

16.08.2021 - 16.09.2021

Timing

31.08.2021 - 29.04.2022

Number of ECTS credits allocated

10 op

Mode of delivery

Contact teaching

Unit

Engineering and Business

Teaching languages
  • Finnish
  • English
Degree programmes
  • Degree Programme in Information and Communication Technology
  • Degree Programme in Information and Communications Technology
Teachers
  • Juha Saarinen
  • Mika Luimula
  • Werner Ravyse
  • Taisto Suominen
Groups
  • PTIVIS18P
    PTIVIS18P

Objective

After completing the course, the student will be able to:
- Network with various R&D project stakeholders
- Collect valuable information from networking activity for R&D project preparation
- Match the most appropriate R&D funding mechanisms to R&D projects
- Prepare a funding application, including budget, objectives, tasks etc.
- Work as part of a TUAS initiated R&D project
- Independently utilize CDIO principles in an R&D context
- Apply suitable research methods for a given R&D project
- Analyze, report and present research results to an international audience

Content

First half of the course
- Negotiations with potential customers and other important stakeholders
- Information needed for R&D project preparations
- Suitable funding instruments for R&D projects
- Preparation of funding application
- Second half of the course
Participation in an existing TUAS R&D project as a programmer, technical artist or assistant project manager
- Executing CDIO principles in an R&D context
- Utilizing research methods for selected artefacts
- Analyzing research results
- Reporting research results in a suitable format (such as demo, poster, conference paper or journal article)
- Presenting results in an international environment such as Nordic Games

Materials

Due to the practical nature of this course, there is no prescribed learning material. All necessary documentation and other material toward the successful completion of Advanced Game Technologies will be shared with students throughout the course.

Teaching methods

The R&D Project course is taught by means of:
1. Contact sessions and lectures;
2. Lecturer and TGL engineer guidance during on-site project work;
- This includes code reviews for programmers and asset evaluations for content producers
3. Customer coaching during on-site project work
4. Self-learning and discovery by students

This course is entirely hands-on and students are expected to take initiative for their learning.

Exam schedules

This course has no formal examination

International connections

This course leans on CDIO principles and takes a project-based learning approach.

Completion alternatives

If the COVID19 situation demands it, we will react toward a more online-driven approach.

Student workload

Each student of the R&D Project course are each expected to complete 270 hours of work:
Below is a rough indication of the hours for different work categories - these are purely an indicator and are expected to be different for each group and can change according to group needs:
1. Contact sessions and lectures (35-45 hours)
2. Coaching during on-site work (60-100 hours)
3. Independent work (100-140 hours)
Students are expected to keep individual work logs of their activities related to the various projects. These work logs form part of the course assessment and will be reviewed regularly throughout the course.

Content scheduling

This course runs from September to December and sees students integrated into one or more of the Futuristic Interactive Technologies research group RDI projects.
- The project(s) will be introduced during the opening two weeks of the course;
- In the next weeks, student groups are expected to research (under supervision) the problem and present a feasible solution;
- After the proposed solutions have been approved, student groups will draw up a project management plan that will see them through to the end of the course;
- The project plan must include development, implementation and scientific testing of the solution;
- The tangibles for the course are a working solution and comprehensive test report.

Further information

Students are responsible for:
1. Distributing and collecting customer and expert feedback forms for their project evaluations.
2. Filling and returning peer- and self-evaluation forms at the end of the project.
Failure to produce these documents will impact the course grade.
The lecturers will provide the appropriate forms at the time they are required.

Evaluation scale

H-5

Assessment methods and criteria

The project is evaluated as follows:
GROUP grade...
- Expert evaluation of the deliverable (H-5);
- Customer evaluation of the deliverable (H-5);
- Lecturer overall impression of the deliverable (H-5).
The average of these three gives a group grade for each student per project.

INDIVIDUAL student per group grade
Each student will also be measured on their contribution to the group's activities by:
- Self assessment of the contribution made;
- Group member evaluation of the contribution made;
- An overall impression by the course lecturers of the individual work logs.
The average of these three gives an individual grade for each student per project.

The course grade will be calculated:
(GROUP grade x 0,3) + (INDIVIDUAL grade x 0,7)